03-03-2012, 01:16 PM | #1 |
Senior Member
Join Date: May 2010
Location: Winnsboro, Texas
Posts: 463
|
53 Ford p/s
I just finished installing new seals in the control valve and a new seal in the cylinder. Put it all back on the car, added fluid, etc. Now I have no assist when turning to the left, but turning to the right everything seems O.K. Turning to the left, it is just like I have no power steering. Air pocket? The car drives fine going down the highway. The steering wheel returns as normal after a left or right turn. The trouble shooting guide is not helpful. Any ideas. Thanks for any suggestions. Charles
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|