Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-04-2018, 05:34 PM   #1
Leatherback 57
Member
 
Leatherback 57's Avatar
 
Join Date: May 2016
Location: Gilroy California
Posts: 42
Default Cylinder Head

On my 29 I always had a problem getting a good idle. Car runs fine under load and never overheats. Thought I would check to get it right.Checked vacuum and had alot of fluctuations. Checked valve adjustment and compression check.1and4 @74# 2and3@50#. Did percent leakage test and 1 and @20 percent 2 and 3@90 percent. Also air going from 2to3 and 3to2 like a blown head gasket! I'm going to pull the head but has anyone experienced this with no overheat or bubbles in radiator and running fine off idle! Very unusual!!
Leatherback 57 is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 05:46 AM.