generator

[56yblock]

I managed to straighten the pulley is not perfect but it should go ... on the old generator there is a condenser behind , connected at the big wire what is it used for ?

[KULTULZ]

Originally Posted by 56yblock

I managed to straighten the pulley is not perfect but it should go ...

... on the old generator there is a condenser behind , connected at the big wire what is it used for ?

That will be for sound suppression to prevent interference for the radio. On the end of the cylinder will (should) be I.D. Stamping.

[56yblock]

works done, the new generator works good i've tried on the road ..no problem

[KULTULZ]

Originally Posted by 56yblock

works done, the new generator works good i've tried on the road ..no problem

GREAT!

Save the old GEN for any spare parts you might need later.

[dmsfrr]

Good job!

[My Old Blue]

Sponsored Links (Register now to hide all advertisements)

I'm cleaning up a good 56' working generator with some fresh paint. I have it apart and see brushes are in good shape. I have a bearing/bushing set I can replace since I have it apart.

Looking at the rear bronze bushing, what is the best way to remove it?

Also, how does this bushing lubricate? I see a spring loaded oiler ball on back plate?? When I took apart, it appeared to have dirty grease as a lubrication or do I lubricate with some light weight oil periodically through the oiler port?