Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 11-29-2019, 08:37 AM   #21
Terry,OH
Senior Member
 
Terry,OH's Avatar
 
Join Date: May 2010
Posts: 3,722
Default Re: V8 60 king pin lock bolts

There is one for sale on Ebay
Terry,OH is offline   Reply With Quote
Old 11-29-2019, 11:24 AM   #22
V8COOPMAN
Senior Member
 
V8COOPMAN's Avatar
 
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 7,971
Default Re: V8 60 king pin lock bolts

Hey Terry....By chance, do you have an item number? I can't find it. DD
__________________
T5 W/TORQUE TUBE


We need ONE special 'check-out' aisle for the few folks that are expeditious & understand the rules!
V8COOPMAN is online now   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 11-29-2019, 06:42 PM   #23
Terry,OH
Senior Member
 
Terry,OH's Avatar
 
Join Date: May 2010
Posts: 3,722
Default Re: V8 60 king pin lock bolts

I do not have the number nor can I find the ad any more. Have you checked with Southside Obsolete?
Terry,OH is offline   Reply With Quote
Old 11-29-2019, 08:29 PM   #24
cas3
Senior Member
 
Join Date: Jan 2011
Location: sw minnesota
Posts: 2,722
Default Re: V8 60 king pin lock bolts

is this it? https://www.ebay.com/itm/NEW-SPINDLE...1928-47-FORD-T
cas3 is offline   Reply With Quote
Old 11-30-2019, 07:48 AM   #25
Terry,OH
Senior Member
 
Terry,OH's Avatar
 
Join Date: May 2010
Posts: 3,722
Default Re: V8 60 king pin lock bolts

Yes item:
233415808648
Slightly different in appearance on the stop.
Terry,OH is offline   Reply With Quote
Old 11-30-2019, 11:28 AM   #26
cas3
Senior Member
 
Join Date: Jan 2011
Location: sw minnesota
Posts: 2,722
Default Re: V8 60 king pin lock bolts

Sponsored Links (Register now to hide all advertisements)
well i'll be darned, that link worked last night, and now it says error.
cas3 is offline   Reply With Quote
Old 11-30-2019, 12:11 PM   #27
rich b
Senior Member
 
rich b's Avatar
 
Join Date: May 2010
Location: Minnesota
Posts: 1,334
Default Re: V8 60 king pin lock bolts

Quote:
Originally Posted by Terry,OH View Post
Yes item:
233415808648
Slightly different in appearance on the stop.
Seems like the application listed for this part is overly wide; I've only seen the round lock pins in early Model A's and the tube axles.

Personally, I would drill the axle and use normal lock and king pins, since beside the round lock pins, you would also have to find king pins with a round notch.
Attached Images
File Type: jpg s-l1600 (Medium).jpg (67.6 KB, 15 views)

Last edited by rich b; 11-30-2019 at 12:15 PM. Reason: more
rich b is offline   Reply With Quote
Old 11-30-2019, 12:32 PM   #28
V8COOPMAN
Senior Member
 
V8COOPMAN's Avatar
 
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 7,971
Default Re: V8 60 king pin lock bolts

Quote:
Originally Posted by rich b View Post
Seems like the application listed for this part is overly wide; I've only seen the round lock pins in early Model A's and the tube axles.

Personally, I would drill the axle and use normal lock and king pins, since beside the round lock pins, you would also have to find king pins with a round notch.

Rich....I'd be careful about drilling an expensive TUBE axle to use the "normal" lock pins. Without going out there and digging-out my tube axle to measure, I believe a tube axle is thicker than an I-beam front to rear where the pins go. And in the case of the king pin notch, the normal notch with the squared-off corners fits the round V8-60 pin perfectly. The king pin won't rotate, nor will it move up or down. DD
__________________
T5 W/TORQUE TUBE


We need ONE special 'check-out' aisle for the few folks that are expeditious & understand the rules!
V8COOPMAN is online now   Reply With Quote
Old 11-30-2019, 12:43 PM   #29
V8COOPMAN
Senior Member
 
V8COOPMAN's Avatar
 
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 7,971
Default Re: V8 60 king pin lock bolts

I just came across this ad by FordBarn member "Hairycanary" making fairly close-looking lock pins. His ad is dated January of this year....FWIW, it might not hurt to send him a PM. Click the link below! Ask the guy to verify that the shank is 0.463" in diameter. DD


https://www.fordbarn.com/forum/showt...=king+pin+lock


__________________
T5 W/TORQUE TUBE


We need ONE special 'check-out' aisle for the few folks that are expeditious & understand the rules!
V8COOPMAN is online now   Reply With Quote
Old 04-02-2020, 07:49 AM   #30
johnboy
Senior Member
 
Join Date: Aug 2010
Posts: 123
Default Re: V8 60 king pin lock bolts

Quote:
Originally Posted by Brent View Post
I've been wanting to get one so I could have my machine shop guy replicate a bunch of them. Anyone care to be a donor? I'll get the original back to you and a new set.




Did you ever get any of the v8 60 king pin locks made? I would like to order a couple . $? Thanks John
johnboy is offline   Reply With Quote
Old 04-19-2021, 10:40 AM   #31
jebbesen05
Junior Member
 
Join Date: Jan 2017
Location: Winona, MN
Posts: 12
Default Re: V8 60 king pin lock bolts

Here is a drawing I made up off an original pin.

http://https://photos.app.goo.gl/Dsjg1nqYyDPVw7xe8

Last edited by jebbesen05; 04-19-2021 at 12:53 PM.
jebbesen05 is offline   Reply With Quote
Old 04-19-2021, 12:04 PM   #32
V8COOPMAN
Senior Member
 
V8COOPMAN's Avatar
 
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 7,971
Default Re: V8 60 king pin lock bolts

Quote:
Originally Posted by jebbesen05 View Post
Here is a drawing I made up off an original pin.

http://https://photos.app.goo.gl/5rrjRGsWyLTmbi8e6

Jeb....That is a very NICE drawing. It is virtually spot-on with the dimensions I noted up in post #9 of this thread (repeated below). DD
_____________________________


Overall length: 3.212"

Total shank length below hex (including threads): 2.063"

Total thread length (threads ONLY): 0.651"

Shank diameter (NOT tapered): 0.463"

Stub length (exposed knob-like part above hex): 0.933"

Stub diameter (tapers down FROM hex): 0.548" MAJOR to 0.538" MINOR (not visually noticeable)

Width (thickness) of hex surfaces: 5/32"-major // 1/8"-minor

Hex size (actual): 0.682".....for 11/16" wrench

Thread diameter (actual): 0.433"......(7/16-20 thread)

Transition radius from STUB to hex: Approx. 1/4" radius
__________________
T5 W/TORQUE TUBE


We need ONE special 'check-out' aisle for the few folks that are expeditious & understand the rules!
V8COOPMAN is online now   Reply With Quote
Old 04-19-2021, 12:35 PM   #33
jebbesen05
Junior Member
 
Join Date: Jan 2017
Location: Winona, MN
Posts: 12
Default Re: V8 60 king pin lock bolts

Thanks. I'd measured my pin with a caliper. Checked the diameter with a mic and came up with .463 also. Changed the drawing to reflect that. I figured a couple guys had asked for a picture. Wanted to make one up for my future reference anyway.

Last edited by jebbesen05; 04-19-2021 at 12:54 PM.
jebbesen05 is offline   Reply With Quote
Old 04-19-2021, 12:56 PM   #34
jebbesen05
Junior Member
 
Join Date: Jan 2017
Location: Winona, MN
Posts: 12
Default Re: V8 60 king pin lock bolts

Link to corrected drawing.

https://photos.app.goo.gl/Dsjg1nqYyDPVw7xe8


Last edited by jebbesen05; 04-19-2021 at 01:08 PM.
jebbesen05 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 02:14 AM.