The Ford Barn

Leatherback 57 · 01-23-2018, 04:51 PM

I have a 29 leatherback with an Autolite heater. What was used between inlet and manifold to seal? 1516743707274642490271.jpg

Jwilli · 01-23-2018, 04:56 PM

Instructions that came with a repop heater that I installed showed a space left open.

CarlG · 01-23-2018, 05:16 PM

Guys in our club that have them use a short piece of SCAT hose.

henry's 31 · 01-23-2018, 05:19 PM

Sponsored Links (Register now to hide all advertisements)

I have seen it both ways. Many people place a section of a pre-heater hose. I even saw someone use a section of a soda can. I do agree that it was ment to be left open

01-23-2018, 04:51 PM	#1
Leatherback 57 Member Join Date: May 2016 Location: Gilroy California Posts: 42	Heater to firewall I have a 29 leatherback with an Autolite heater. What was used between inlet and manifold to seal? 1516743707274642490271.jpg

01-23-2018, 04:56 PM	#2
Jwilli Senior Member Join Date: Apr 2014 Location: Kennesaw, Ga Posts: 511	Re: Heater to firewall Instructions that came with a repop heater that I installed showed a space left open.

01-23-2018, 05:19 PM	#4
henry's 31 Senior Member Join Date: Mar 2014 Location: Columbus(Cataula) Georgia Posts: 849	Re: Heater to firewall Sponsored Links (Register now to hide all advertisements) I have seen it both ways. Many people place a section of a pre-heater hose. I even saw someone use a section of a soda can. I do agree that it was ment to be left open __________________ Henry' s 31 Last edited by henry's 31; 01-23-2018 at 08:20 PM.