The Ford Barn

jimvette59 · 04-26-2023, 03:27 PM

Can the 9" long pressure plate bolt up to the 9 1/2" bolt pattern ?

Kube · 04-26-2023, 06:08 PM

Quote:

Originally Posted by jimvette59

Can the 9" long pressure plate bolt up to the 9 1/2" bolt pattern ?

No.

DavidG · 04-26-2023, 06:11 PM

This seems like a self-answering question.

Krylon32 · 04-26-2023, 07:27 PM

If you need one try Fort Wayne Clutch, Ask for Lou.

blueoval37 · 04-26-2023, 11:12 PM

Lou just rebuilt my pressure plate did excellent job

jimvette59 · 04-27-2023, 07:45 AM

Sponsored Links (Register now to hide all advertisements)

Thanks blueoval 37

Ol' Ron · 04-27-2023, 07:50 AM

Pretty easy to redrill the flywheel.
Gramps

jimvette59 · 04-27-2023, 08:04 AM

I just looked up the spects. for the 9" PP the bolts holes are three sets of two 120 degs.
apart with a 5.187 diameter and two 5 1/16 x 18 threaded holes 2.844 C to C. The 9 1/2" PP bolt holes are 3.000 apart . Just a note a 10" long does not work at all.

jimvette59 · 04-27-2023, 08:14 AM

Quote:

Originally Posted by Ol' Ron

Pretty easy to redrill the flywheel.
Gramps

Thanks Ron. I will do that. I was just looking for a quick answer after drilling for a 10 long that does not work. Please see my last post Well back to the drawing board.
Not putting down The HAMB but i got so many stupid remarks i got so mixed up I ordered a 10 long.

04-26-2023, 03:27 PM	#1
jimvette59 Senior Member Join Date: Jun 2010 Location: Perry OH Posts: 1,330	Pressure Plate ? Can the 9" long pressure plate bolt up to the 9 1/2" bolt pattern ?

04-26-2023, 06:11 PM	#3
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,102	Re: Pressure Plate ? This seems like a self-answering question.

04-26-2023, 07:27 PM	#4
Krylon32 Senior Member Join Date: May 2010 Posts: 4,489	Re: Pressure Plate ? If you need one try Fort Wayne Clutch, Ask for Lou.

04-26-2023, 11:12 PM	#5
blueoval37 Junior Member Join Date: Apr 2023 Location: Tonica, Illinois Posts: 21	Re: Pressure Plate ? Lou just rebuilt my pressure plate did excellent job __________________ 37 Ford Slantback 60hp. All steel nut and bolt restoration in process. Period correct hot rod. Boling Brothers Lincoln Brakes 39 Pedals Van Pelt Built 3spd HotRodWorks Banjo Rearend

04-27-2023, 07:45 AM	#6
jimvette59 Senior Member Join Date: Jun 2010 Location: Perry OH Posts: 1,330	Re: Pressure Plate ? Sponsored Links (Register now to hide all advertisements) Thanks blueoval 37

04-27-2023, 07:50 AM	#7
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,860	Re: Pressure Plate ? Pretty easy to redrill the flywheel. Gramps

04-27-2023, 08:04 AM	#8
jimvette59 Senior Member Join Date: Jun 2010 Location: Perry OH Posts: 1,330	Re: Pressure Plate ? I just looked up the spects. for the 9" PP the bolts holes are three sets of two 120 degs. apart with a 5.187 diameter and two 5 1/16 x 18 threaded holes 2.844 C to C. The 9 1/2" PP bolt holes are 3.000 apart . Just a note a 10" long does not work at all.