|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-26-2023, 03:27 PM | #1 |
Senior Member
Join Date: Jun 2010
Location: Perry OH
Posts: 1,330
|
Pressure Plate ?
Can the 9" long pressure plate bolt up to the 9 1/2" bolt pattern ?
|
04-26-2023, 06:08 PM | #2 |
Senior Member
Join Date: May 2010
Location: Wisconsin, USA
Posts: 9,007
|
Re: Pressure Plate ?
No.
__________________
"I can explain it for you. However, I can't understand it for you". |
Sponsored Links (Register now to hide all advertisements) |
|
04-26-2023, 06:11 PM | #3 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
Re: Pressure Plate ?
This seems like a self-answering question.
|
04-26-2023, 07:27 PM | #4 |
Senior Member
Join Date: May 2010
Posts: 4,484
|
Re: Pressure Plate ?
If you need one try Fort Wayne Clutch, Ask for Lou.
|
04-26-2023, 11:12 PM | #5 |
Junior Member
Join Date: Apr 2023
Location: Tonica, Illinois
Posts: 21
|
Re: Pressure Plate ?
Lou just rebuilt my pressure plate did excellent job
__________________
37 Ford Slantback 60hp. All steel nut and bolt restoration in process. Period correct hot rod. Boling Brothers Lincoln Brakes 39 Pedals Van Pelt Built 3spd HotRodWorks Banjo Rearend |
04-27-2023, 07:45 AM | #6 |
Senior Member
Join Date: Jun 2010
Location: Perry OH
Posts: 1,330
|
Re: Pressure Plate ?
Sponsored Links (Register now to hide all advertisements)
|
04-27-2023, 07:50 AM | #7 |
Senior Member
Join Date: May 2010
Location: Chester Vt
Posts: 8,860
|
Re: Pressure Plate ?
Pretty easy to redrill the flywheel.
Gramps |
04-27-2023, 08:04 AM | #8 |
Senior Member
Join Date: Jun 2010
Location: Perry OH
Posts: 1,330
|
Re: Pressure Plate ?
I just looked up the spects. for the 9" PP the bolts holes are three sets of two 120 degs.
apart with a 5.187 diameter and two 5 1/16 x 18 threaded holes 2.844 C to C. The 9 1/2" PP bolt holes are 3.000 apart . Just a note a 10" long does not work at all. |
04-27-2023, 08:14 AM | #9 |
Senior Member
Join Date: Jun 2010
Location: Perry OH
Posts: 1,330
|
Re: Pressure Plate ?
Thanks Ron. I will do that. I was just looking for a quick answer after drilling for a 10 long that does not work. Please see my last post Well back to the drawing board.
Not putting down The HAMB but i got so many stupid remarks i got so mixed up I ordered a 10 long. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|