|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-18-2013, 09:52 PM | #1 |
Senior Member
Join Date: May 2010
Location: 215 E. 6th Street Northport, Michigan 49670
Posts: 941
|
Splash aprons-30 Model A
On a 1930 Sport Coupe or Roadster- were the splash apron front sections always spot welded to the fenders prior to assembly?? I Have 2 NOS front sections, but they have elongated holes in the lip that joins the fenders. Like they should be bolted.
Thanks! Bob
__________________
Bob from Northport Northport, Michigan |
10-18-2013, 10:00 PM | #2 |
Senior Member
Join Date: May 2010
Location: Liberty, MO
Posts: 201
|
Re: Splash aprons-30 Model A
I also bought a N.O.S. apron that is that way and it also has the side mount hole whata deal for 50.00 at the painters now going on my open pickup
|
Sponsored Links (Register now to hide all advertisements) |
|
10-18-2013, 10:02 PM | #3 | |
Senior Member
Join Date: Nov 2010
Location: Fairbanks, Alaska
Posts: 767
|
Re: Splash aprons-30 Model A
Quote:
Sounds to me like what you have are '31 AA Splash Shield Nose Sections. The '31 AA nose sections were bolted on, the '30 nose sections were spot welded on both the A and AA. Darryl in Fairbanks |
|
10-18-2013, 11:47 PM | #4 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: Splash aprons-30 Model A
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|