Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-02-2019, 03:07 PM   #1
old31
Senior Member
 
Join Date: Jan 2016
Posts: 2,106
Default 31 Front spring shackles, how tight or lose?

Last winter I replaced my 31 front spring shackles and did some work on the spring.

Today I noticed when lifting the car on the lift, or lifting each side with a jack, the shackles didn't move the same on the left and right and appeared to be binding.

How tight or loose should the shackles slide into the perch? Should they need to be hammered in, or slide in with a push of the hand or, lightly tapped in?

They are making an effort to hammer them out.

Last edited by old31; 10-02-2019 at 03:13 PM.
old31 is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:46 AM.