|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-24-2018, 07:22 PM | #1 |
Senior Member
Join Date: Dec 2012
Location: Payette, ID
Posts: 936
|
Intake not mating up to block very well
I have a 59AB block and it originally came with a Navarro 3-2 manifold. With that manifold the 3/8 bolts go in all the way by hand. I decided that I wanted to go with an Offenhauser 2-2 manifold.
Most of the bolts will only go in half a turn by hand with the Offy. You can thread them in with a socket and ratchet but they really bind up. Only did that to one of them. It is as if the holes are just a scoch off center. Best solution. A simple one I hope |
|
|
Sponsored Links (Register now to hide all advertisements) |
|