The Ford Barn

Gerald cook · 08-21-2022, 11:23 AM

Does anyone need a reference book for these years of ford truck.

miker98038 · 08-21-2022, 11:09 PM

Bump. Kultulz? Nobody you know?

KULTULZ · 08-21-2022, 11:21 PM

I have mine on CD. Kinda gets you spoiled.

Is the catalog bound or loose leaf?

alt63bird · 08-22-2022, 02:27 PM

I'm looking for one - the damn $25 CD I got from Obsolete Ford in OKC a couple of years ago won't load because it's trying to find a website that no longer exists to get the key to unlock it. A friend loaned me a 57-68 truck MPC up through Section 100 but took it back. PM me.

flatrod · 08-23-2022, 09:32 AM

Any interest in the old mico fish that Ford used? I don't have the viewer, which I understand is needed to see them. Plus I have some price sheets from the late 70's, OSI books and other things.

KULTULZ · 08-23-2022, 09:41 AM

Sponsored Links (Register now to hide all advertisements)

Quote:

... OSI books and other things ...

Publication dates on the OSI MANUALS?

What other things?

flatrod · 08-24-2022, 09:37 AM

I will dig them out and get dates. I have not looked at these in over 20 years.

flatrod · 08-24-2022, 09:52 PM

OSI dates..
July 1979 and January 1980

alt63bird · 08-24-2022, 10:09 PM

Quote:

Originally Posted by flatrod

Any interest in the old mico fish that Ford used? I don't have the viewer, which I understand is needed to see them. Plus I have some price sheets from the late 70's, OSI books and other things.

I don't know if the microfiche viewer I have for Sherwin-Williams paint microfiches would work but I'm guessing they're similar size. Might be worth a gamble to try and see if they work?

flatrod · 08-25-2022, 09:29 AM

Most viewers I tried show about 10 or 20 pages at the same time, too small to read. I don't think I have your address still, Alan, PM me and I will send a few to see if they work.

KULTULZ · 08-25-2022, 11:15 AM

The FORD viewer shows one page at a time.

I used to have one for regular viewing and one that could print the page.

Then I developed this huge brain fart that told me (in an inner voice) to can them as I would not ever need them again. I got rid of them and slides that went back years most of them early print dates (box fulls).

Yes, the boy has problems ...

flatrod · 08-25-2022, 12:49 PM

I had a Ford viewer but didn't have room for it and really never used it, so it got tossed out, but I kept stacks of slides.

alt63bird · 08-27-2022, 12:55 PM

Flatrod: PM sent.

flatrod · 09-01-2022, 08:55 AM

Alt63bird, I did not get your PM

alt63bird · 09-02-2022, 01:31 PM

Flatrod: got your pm from Monday and responded with address.
Gerald: Are you trying to find a home for the 64-72 truck MPC? I am interested in the set.

08-21-2022, 11:23 AM	#1
Gerald cook Member Join Date: Jan 2014 Posts: 41	Ford master parts book 64-72 Does anyone need a reference book for these years of ford truck.

08-21-2022, 11:09 PM	#2
miker98038 Senior Member Join Date: Mar 2013 Location: Kent, WA. Tucson, AZ Posts: 1,398	Re: Ford master parts book 64-72 Bump. Kultulz? Nobody you know?

08-21-2022, 11:21 PM	#3
KULTULZ Senior Member Join Date: Aug 2012 Location: IN A 'GALAXIE' FAR FAR AWAY Posts: 6,485	Re: Ford master parts book 64-72 I have mine on CD. Kinda gets you spoiled. Is the catalog bound or loose leaf? __________________ ***** We should have a contest. The player has to start at the very last post of a thread & then try to guess what the OP's original question was about ...

08-22-2022, 02:27 PM	#4
alt63bird Senior Member Join Date: Feb 2011 Location: outside Omaha, NE Posts: 276	Re: Ford master parts book 64-72 I'm looking for one - the damn $25 CD I got from Obsolete Ford in OKC a couple of years ago won't load because it's trying to find a website that no longer exists to get the key to unlock it. A friend loaned me a 57-68 truck MPC up through Section 100 but took it back. PM me. __________________ Alan H. Tast AIA, LEED AP BD+C Technical Director/Past President-Editor-Publications Director, Vintage Thunderbird Club Int'l. (VTCI) http://www.vintagethunderbirdclub.net Author, "Thunderbird 1955-1966" & "Thunderbird 50 Years" 35+ year member, Crown Victoria Ass'n.

08-23-2022, 09:32 AM	#5
flatrod Senior Member Join Date: Dec 2012 Location: Anchorage Alaska Posts: 291	Re: Ford master parts book 64-72 Any interest in the old mico fish that Ford used? I don't have the viewer, which I understand is needed to see them. Plus I have some price sheets from the late 70's, OSI books and other things.

08-24-2022, 09:37 AM	#7
flatrod Senior Member Join Date: Dec 2012 Location: Anchorage Alaska Posts: 291	Re: Ford master parts book 64-72 I will dig them out and get dates. I have not looked at these in over 20 years.

08-24-2022, 09:52 PM	#8
flatrod Senior Member Join Date: Dec 2012 Location: Anchorage Alaska Posts: 291	Re: Ford master parts book 64-72 OSI dates.. July 1979 and January 1980

08-25-2022, 09:29 AM	#10
flatrod Senior Member Join Date: Dec 2012 Location: Anchorage Alaska Posts: 291	Re: Ford master parts book 64-72 Most viewers I tried show about 10 or 20 pages at the same time, too small to read. I don't think I have your address still, Alan, PM me and I will send a few to see if they work.

08-25-2022, 11:15 AM	#11
KULTULZ Senior Member Join Date: Aug 2012 Location: IN A 'GALAXIE' FAR FAR AWAY Posts: 6,485	Re: Ford master parts book 64-72 The FORD viewer shows one page at a time. I used to have one for regular viewing and one that could print the page. Then I developed this huge brain fart that told me (in an inner voice) to can them as I would not ever need them again. I got rid of them and slides that went back years most of them early print dates (box fulls). Yes, the boy has problems ... __________________ ***** We should have a contest. The player has to start at the very last post of a thread & then try to guess what the OP's original question was about ... Last edited by KULTULZ; 08-25-2022 at 05:04 PM. Reason: CRS - DISJOINTED SENTENCES

08-25-2022, 12:49 PM	#12
flatrod Senior Member Join Date: Dec 2012 Location: Anchorage Alaska Posts: 291	Re: Ford master parts book 64-72 I had a Ford viewer but didn't have room for it and really never used it, so it got tossed out, but I kept stacks of slides.

08-27-2022, 12:55 PM	#13
alt63bird Senior Member Join Date: Feb 2011 Location: outside Omaha, NE Posts: 276	Re: Ford master parts book 64-72 Flatrod: PM sent. __________________ Alan H. Tast AIA, LEED AP BD+C Technical Director/Past President-Editor-Publications Director, Vintage Thunderbird Club Int'l. (VTCI) http://www.vintagethunderbirdclub.net Author, "Thunderbird 1955-1966" & "Thunderbird 50 Years" 35+ year member, Crown Victoria Ass'n.

09-01-2022, 08:55 AM	#14
flatrod Senior Member Join Date: Dec 2012 Location: Anchorage Alaska Posts: 291	Re: Ford master parts book 64-72 Alt63bird, I did not get your PM

09-02-2022, 01:31 PM	#15
alt63bird Senior Member Join Date: Feb 2011 Location: outside Omaha, NE Posts: 276	Re: Ford master parts book 64-72 Flatrod: got your pm from Monday and responded with address. Gerald: Are you trying to find a home for the 64-72 truck MPC? I am interested in the set. __________________ Alan H. Tast AIA, LEED AP BD+C Technical Director/Past President-Editor-Publications Director, Vintage Thunderbird Club Int'l. (VTCI) http://www.vintagethunderbirdclub.net Author, "Thunderbird 1955-1966" & "Thunderbird 50 Years" 35+ year member, Crown Victoria Ass'n.