The Ford Barn

Ford Acar · 10-26-2022, 11:15 PM

I am in the process of rebuilding my transmission. What is the concensus on re-using snap rings?

dave in australia · 10-27-2022, 01:51 AM

If it's the rings to hold the input/output bearings in place, I don't see an issue as long as they have tension and are not loose when sitting in the groove.

BRENT in 10-uh-C · 10-27-2022, 05:49 AM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by Ford Acar

I am in the process of rebuilding my transmission. What is the concensus on re-using snap rings?

Dave's post above is my exact thoughts too.

10-26-2022, 11:15 PM	#1
Ford Acar Junior Member Join Date: Sep 2017 Location: Melbourne, Australia Posts: 22	Transmission Snap Rings I am in the process of rebuilding my transmission. What is the concensus on re-using snap rings?

10-27-2022, 01:51 AM	#2
dave in australia Senior Member Join Date: May 2010 Location: Victoria, Australia Posts: 1,177	Re: Transmission Snap Rings If it's the rings to hold the input/output bearings in place, I don't see an issue as long as they have tension and are not loose when sitting in the groove.