The Ford Barn

1930artdeco · 03-16-2023, 08:00 PM

We have power!!!! Now to exterminate all of the gremlins. Some things work-most do not, no surprise there though.

miker98038 · 03-16-2023, 08:58 PM

Nothing like progress. You did the work take some credit. lol.

KULTULZ · 03-17-2023, 02:00 AM

!!! It lives !!!

1930artdeco · 03-18-2023, 07:49 PM

Lighting circuit is now finished and I am now moving onto another circuit. Which one should I chose........

miker98038 · 03-18-2023, 08:11 PM

I’d do start/ignition/accessories next. Now that will branch off to a number of things, but you can isolate them. Or move on to taillights/brakes/turn signals. No matter what you choose, keep the small fuse and jumper on the main battery feed at the battery. Just in case theres a direct fault to ground. You don’t want to have to buy replacement smoke, I don’t know if they make it for Fords.

1930artdeco · 03-19-2023, 11:34 AM

Sponsored Links (Register now to hide all advertisements)

I replaced the original wiring with a kit that has a fuse panel so I am relatively safe there as far as smoke goes. Since I have head lights/parking and tail lights powered up correctly I was going to work turn signals and brake today, then oil/gen and heater next. Then move to the ign and charging and horns. Sound reasonable? Oh I still have to deal with the fuel tank as well.

Mike

Gene F · 03-19-2023, 02:07 PM

I would like to rewire my streetrod, but I hate to start on another major project.

TravisDM · 03-24-2023, 01:42 AM

Well done!

03-16-2023, 08:58 PM	#2
miker98038 Senior Member Join Date: Mar 2013 Location: Kent, WA. Tucson, AZ Posts: 1,398	Re: Thank you for the help Nothing like progress. You did the work take some credit. lol.

03-17-2023, 02:00 AM	#3
KULTULZ Senior Member Join Date: Aug 2012 Location: IN A 'GALAXIE' FAR FAR AWAY Posts: 6,475	Re: Thank you for the help *!!! It lives !!!* __________________ *** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ... DIAGNOSED CDO** - (OCD In Correct Alphabetical Order)

03-18-2023, 07:49 PM	#4
1930artdeco Senior Member Join Date: May 2010 Location: Lynden, Wa Posts: 3,552	Re: Thank you for the help Lighting circuit is now finished and I am now moving onto another circuit. Which one should I chose........ __________________ 1930 TownSedan (Briggs) 1957 Country Sedan

03-19-2023, 11:34 AM	#6
1930artdeco Senior Member Join Date: May 2010 Location: Lynden, Wa Posts: 3,552	Re: Thank you for the help Sponsored Links (Register now to hide all advertisements) I replaced the original wiring with a kit that has a fuse panel so I am relatively safe there as far as smoke goes. Since I have head lights/parking and tail lights powered up correctly I was going to work turn signals and brake today, then oil/gen and heater next. Then move to the ign and charging and horns. Sound reasonable? Oh I still have to deal with the fuel tank as well. Mike __________________ 1930 TownSedan (Briggs) 1957 Country Sedan

03-19-2023, 02:07 PM	#7
Gene F Senior Member Join Date: Mar 2012 Location: Ohio Posts: 1,972	Re: Thank you for the help I would like to rewire my streetrod, but I hate to start on another major project.

03-24-2023, 01:42 AM	#8
TravisDM Member Join Date: Sep 2020 Posts: 52	Re: Thank you for the help Well done!