|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-23-2012, 07:42 PM | #1 |
Senior Member
Join Date: Jul 2011
Location: Omak, Washington
Posts: 207
|
front end alignment
Just in the process of putting my front axle back in and wanted to hear opinions on how much toe in to use. I plan on running radial tires. Probably 165-70-15. Doesn't seem like there is much else I can do to align it. I did use a laser to establish that the spindles were straight and centered to the frame.
|
12-23-2012, 07:55 PM | #2 |
Member
Join Date: May 2010
Location: El Cajon CA
Posts: 73
|
Re: front end alignment
I always set my toe-in zero to 1/8 of an inch. Be sure you have no toe-out. Toe out causes a shimmy. Good luck.
|
Sponsored Links (Register now to hide all advertisements) |
|
12-23-2012, 09:41 PM | #3 |
Senior Member
Join Date: May 2010
Location: Napa,California
Posts: 6,037
|
Re: front end alignment
I toe mine in at 3/16" to a 1/4"
|
12-24-2012, 01:22 AM | #4 |
Senior Member
Join Date: Oct 2010
Location: Callahan Fla
Posts: 1,149
|
Re: front end alignment
1/8 toe in, if you toe out its like driving on ice(not fun at all)
__________________
Wanted, a car with a " Dynaflex Superflowing Unijet Turbovasculator which is Syncromeshed to the Multicoil Hydrotensioned Dual vacuum Dynomometer. " |
12-24-2012, 09:23 AM | #5 |
Senior Member
Join Date: May 2010
Location: Altamont, NY
Posts: 1,004
|
Re: front end alignment
Sponsored Links (Register now to hide all advertisements)
__________________
dickspadaro.com |
|
|
Sponsored Links (Register now to hide all advertisements) |
|