|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-25-2017, 10:31 AM | #1 |
Member
Join Date: Mar 2014
Posts: 74
|
KR Wilson part ID
Picked up a KRW engine stand and this was one of the attachments. It's got a number 6005 on it but google isn't helping me here. Anyone know what it's for?
|
07-25-2017, 08:10 PM | #2 |
Senior Member
Join Date: Mar 2012
Location: Addison,ll.
Posts: 454
|
Re: KR Wilson part ID
That is a later engine adapter from the late forties into the sixties. It will not orient in a locking position on the KRW #35 stand. The 6005 is for the 6 or 8 cylinder flathead engines. Although other adapters for other engines would have the 6005 designation and a suffix letter after such as 6005C or 6005E.
|
Sponsored Links (Register now to hide all advertisements) |
|
07-26-2017, 08:16 AM | #3 | |
Member
Join Date: Mar 2014
Posts: 74
|
Re: KR Wilson part ID
Quote:
Last edited by Vonn Ditch; 07-26-2017 at 08:16 AM. Reason: spelling |
|
07-27-2017, 03:35 PM | #4 |
Member Emeritus
Join Date: May 2010
Location: Madison, NJ
Posts: 5,230
|
Re: KR Wilson part ID
KRW parts numbers after the early '30s are keyed to the part the tool is for...here, the 6000 # just puts it into the engine group, and beyond that is meaningless without whatever additional number or letter was used by KRW to designate a particular engine! Scrutinize it far possible heavily painted stampings. It is not for a V8 flathead!
|
07-28-2017, 07:44 AM | #5 |
Senior Member
Join Date: May 2010
Location: Paris, Tennessee
Posts: 182
|
Re: KR Wilson part ID
Sponsored Links (Register now to hide all advertisements)
Last edited by my2nd40; 07-28-2017 at 07:47 AM. Reason: xx |
|
|
Sponsored Links (Register now to hide all advertisements) |
|