|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-02-2020, 02:20 PM | #1 |
Junior Member
Join Date: Oct 2014
Posts: 6
|
What type of PCV valve Flathead ford
I had 2 replies to my first post. Thank you, I think its part solved my problem.
Much appreciated. Next question. I need to source a pcv valve to suit my motor. Its a 266 CI modified producing I guess about 140/150 hp. I need a PCV valve with a thread on it which will be compatible. I need a manufactures number like Fram or other that I can source in the UK. To quote a pontiac v6 or chevvy small block wont work because we dont have them this side of the pond. I have noted from a previous post that a Fram FV294 will work but no thread on it, so I would have to glue it into the manifold. Not too keen on that. Fram do a FV345 this has a thread on. Would this be compatible. Your input again will be much appreciated. Cheers fellas stay safe have a good weekend. Marcus |
05-02-2020, 04:31 PM | #2 |
Senior Member
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
|
Re: What type of PCV valve Flathead ford
This is the setup I am using on an 8BA./8CM.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES |
Sponsored Links (Register now to hide all advertisements) |
|
05-02-2020, 07:27 PM | #3 |
Senior Member
Join Date: May 2010
Location: Napa,California
Posts: 6,037
|
Re: What type of PCV valve Flathead ford
The last one I did I used a PCV from a mid 80's Ford V-6. Worked fine.
|
05-03-2020, 09:23 AM | #4 |
Senior Member
Join Date: Sep 2013
Location: SoCal-Redlands
Posts: 3,026
|
Re: What type of PCV valve Flathead ford
Sponsored Links (Register now to hide all advertisements)
https://www.fordbarn.com/forum/showthread.php?t=237933
__________________
Making the simple complicated for over 30 years. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|