|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-17-2019, 09:49 AM | #1 |
Junior Member
Join Date: Aug 2018
Posts: 9
|
52 Ford flathead fuel pump push rod
when I bought this car, the mechanical fuel pump and push rod was replaced with an elec. pump. My question is ; how do I install a new push rod so I can put the mechanical pump back on car in line w/elec pump ? Can I just insert it down through the top , assuming there is a bushing in place. Does it thread on to something at the cam or just ride there ? How do I know that it is all the way down?
Thanks for any and all help. Bob Rinker |
10-17-2019, 12:17 PM | #2 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 7,040
|
Re: 52 Ford flathead fuel pump push rod
Sponsored Links (Register now to hide all advertisements)
You posted in a section intended for questions to the editors about the site. You need to post it here: https://www.fordbarn.com/forum/forumdisplay.php?f=4 Good luck and welcome. Charlie Stephens |
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|