The Ford Barn

KiWinUS · 12-02-2022, 03:46 PM

Quote:

Originally Posted by Mart

I always say if a hub comes off with a puller other than the ones mentioned, it wasn't tight enough!

Quote:

Originally Posted by STAN WHITE

I would be interested in one , No i do not have the box . If you are interested in selling one give me a call. Thanks Stan 775 364 4367 Northern Nevada

Sorry super busy. Message message through barn is best for me. $200 plus shipping. Cheers

Veeder · 12-03-2022, 03:34 PM

Stan

Make sur you back off the pads!!!

dean333 · 12-04-2022, 09:14 PM

Is this correct for 36? It doesn’t fit on my 37. Bought it years ago for a 36 but never used it.

petehoovie · 12-04-2022, 10:25 PM

Quote:

Originally Posted by dean333

Is this correct for 36? It doesn’t fit on my 37. Bought it years ago for a 36 but never used it.

rockfla · 12-05-2022, 01:59 PM

Quote:

Originally Posted by dean333

Is this correct for 36? It doesn’t fit on my 37. Bought it years ago for a 36 but never used it.

The Vintage Precision one fits them both.....ALL!!! 28-48

dean333 · 12-05-2022, 02:53 PM

Sponsored Links (Register now to hide all advertisements)

Rock, that’s what I thought when I bought my puller but it doesn’t fit my 37.

rockfla · 12-05-2022, 04:08 PM

Quote:

Originally Posted by dean333

Rock, that’s what I thought when I bought my puller but it doesn’t fit my 37.

The Vintage Precision will, I've pulled my 32 Ford & 39 Mercury with it!!! Works swimmingly, Fixing to use it on my 47 Mercury here shortly!!!..... AS advertised "28-48"

dean333 · 12-05-2022, 04:21 PM

Roc, do you have a photo and the measurements of the opening? Thanks!

rockfla · 12-05-2022, 04:48 PM

Quote:

Originally Posted by dean333

Roc, do you have a photo and the measurements of the opening? Thanks!

Tim

I will in about 45 mins to an hour when I get home!!!

rockfla · 12-05-2022, 04:52 PM

Tim
Here is a photo from vintage precision's web page, as you can see, the cap that screws onto the axle end and you push against, has a long slot that it can slide in for short OR long snout hubs!!!!! As it states, it will pull from Model A's to 48 V8's!!!!

petehoovie · 12-05-2022, 04:55 PM

Quote:

Originally Posted by rockfla

Tim
Here is a photo from vintage precision's web page, as you can see, the cap that screws onto the axle end and you push against, has a long slot that it can slide in for short OR long snout hubs!!!!! As it states, it will pull from Model A's to 48 V8's!!!!

rockfla · 12-05-2022, 07:09 PM

Tim
I had a little project to finish up in my shop so sorry on the delay in getting these posted, I hope this is what you were asking for???

petehoovie · 12-05-2022, 07:29 PM

Quote:

Originally Posted by rockfla

Tim
I had a little project to finish up in my shop so sorry on the delay in getting these posted, I hope this is what you were asking for???

Adriatic Machine · 12-06-2022, 02:50 PM

I have the other style that gets secured behind 3 lug nuts. I like this style much better

51504bat · 12-06-2022, 02:59 PM

Quote:

Originally Posted by Adriatic Machine

I have the other style that gets secured behind 3 lug nuts. I like this style much better

Until you warp a drum in the removal process.

PGBuick · 12-09-2022, 02:46 PM

I am also interested in the hub puller if you still have one, KiWinUS.
Thanks

KiWinUS · 12-09-2022, 03:15 PM

Quote:

Originally Posted by PGBuick

I am also interested in the hub puller if you still have one, KiWinUS.
Thanks

Still available. Barely used. $200 plus shipping. No wooden box. Pm me if interested. Cheers

PGBuick · 12-10-2022, 07:25 PM

New Vintage Precision is $175. Thanks anyways

Zeke5180 · 12-12-2022, 08:38 AM

FYI
The New Vintage Precision hub puller will not work on a hub that has a protruding ring as my 37 has.

Zeke

Ben38 · 12-12-2022, 10:09 AM

I had that problem on my 38 too. I called them and they recommended sanding off some of the surface roughness on the ring. Worked like a charm.

12-03-2022, 03:34 PM	#22
Veeder Senior Member Join Date: Dec 2012 Location: CT Posts: 394	Re: rear brake drum puller Stan Make sur you back off the pads!!!

12-05-2022, 02:53 PM	#26
dean333 Senior Member Join Date: Jun 2012 Location: Shorewood Illinois Posts: 863	Re: rear brake drum puller Sponsored Links (Register now to hide all advertisements) Rock, that’s what I thought when I bought my puller but it doesn’t fit my 37. __________________ Tim Carlig

12-05-2022, 04:21 PM	#28
dean333 Senior Member Join Date: Jun 2012 Location: Shorewood Illinois Posts: 863	Re: rear brake drum puller Roc, do you have a photo and the measurements of the opening? Thanks! __________________ Tim Carlig

12-06-2022, 02:50 PM	#34
Adriatic Machine Junior Member Join Date: Jan 2017 Location: Long Island, NY Posts: 10	Re: rear brake drum puller I have the other style that gets secured behind 3 lug nuts. I like this style much better

12-09-2022, 02:46 PM	#36
PGBuick Member Join Date: Nov 2021 Location: Central Mass. Posts: 96	Re: rear brake drum puller I am also interested in the hub puller if you still have one, KiWinUS. Thanks

12-10-2022, 07:25 PM	#38
PGBuick Member Join Date: Nov 2021 Location: Central Mass. Posts: 96	Re: rear brake drum puller New Vintage Precision is $175. Thanks anyways

12-12-2022, 08:38 AM	#39
Zeke5180 Member Join Date: Feb 2019 Location: Illinois Posts: 48	Re: rear brake drum puller FYI The New Vintage Precision hub puller will not work on a hub that has a protruding ring as my 37 has. Zeke

12-12-2022, 10:09 AM	#40
Ben38 Member Join Date: May 2010 Location: Apple Valley, MN Posts: 61	Re: rear brake drum puller I had that problem on my 38 too. I called them and they recommended sanding off some of the surface roughness on the ring. Worked like a charm.