Model a rear axle tubes,torque tubes,wishbones ect

[poweredbylincoln]

Hello I have several cleaned on the inside and cleaned n primed on the outside model a rear axle tubes.

I also have cleaned and primed torque tubes, these are a pain to clean on the inside


as well as rear wishbones cleaned n painted and one that need to be redone as well



also have many model a flywheel cores,transmission cores car and truck and
complete front and rear ends,


and some rusty blocks and roller wire wheels I would like to sell cheap


I have other "a'" parts feel free to look at my other posts and

i am looking for a good 30/31 pu back, a 30/31 roadster cowl and possibly doors and also possibly 30/31 pu/sedan doors

thank you

[poweredbylincoln]

btt if you are interested please let me know and feel free to send me your email if you would like pictures of parts and you phone # if you have any additional questions

thank you

and I am still looking for the parts at the bottom of my add

[michael37]

interested in the wire wheels. are they 19 or 21 inch? and can you send me pics to [email protected]

[modelaonly.com]

any radis rods?

[rabaut]

You wouldn't have any old spring perches? I am building a front end demo unit for the club and I would like to have one to show.

Thanks

Mike

[Brentwood Bob]

Sponsored Links (Register now to hide all advertisements)

have several sets of radius rods. send lincoln your email, and we will contact you. Bob

[marcshall]

hi bob do you have original 28-29 good shape front U bolts top & bottom plates , 2 sets thanks john from duncan can.

[modelaonly.com]

[email protected] looking for radis rods.

[Brentwood Bob]

dave have all three versions of radius rods, don't have any idea what freight would be where are you located?
no on front u bolts and bottom plates.
Bob

[Brentwood Bob]

Have spring perches. Will see if I can find a single. They can be troublesome to remove from the axle. Bob

[poweredbylincoln]

btt thank you

[poweredbylincoln]

back to top if you are interested feel free to send me a private message

thank you

[rabaut]

Thanks for looking for the spring perch. Do you have a contact # ? Please email it to me at

[email protected]

Thanks,

Mike

[poweredbylincoln]

btt

[poweredbylincoln]

if interested please pm me thank you =)

[poweredbylincoln]

btt thank you fordbarn

[poweredbylincoln]

btt if you need any of this please pm me =)

[poweredbylincoln]

please pm me if interested in any of it thank you

[Ron Engen]

I think I saw also,complete rear ends. I need rear end for a 1930 tudor , [email protected]

[Brentwood Bob]

The complete rear end is probably 28. It was hooked up to a multi disk clutch setup. The rear radius rods on the complete assembly with the torque tube and drive shaft are the early ones. Bob