The Ford Barn

Tom B. · 10-08-2015, 02:23 PM

I want to replace the gaskets and the seal around the glass of the windshield on my 1930 coupe. Removing the visor and windshield look pretty complicated to me. Can someone tell me the step by step procedure for this project?
Tom B.

Big hammer · 10-08-2015, 04:18 PM

Sponsored Links (Register now to hide all advertisements)

It's not hard to remove, on my 31 Tudor, swing the windshield forward, there are several screws up thru the hinge, get some helping hands or carefully support windshield and remove it. No need to remove anything else, at lease on my Tudor. When you have it on your work bench, in the upper corners of the frame are small screws to remove the glass. Very good screwdrivers are needed to get the screws out. Check out for other post it has been covered many times :-)

10-08-2015, 02:23 PM	#1
Tom B. Senior Member Join Date: May 2010 Location: Wautoma Posts: 112	1930 windshield removal I want to replace the gaskets and the seal around the glass of the windshield on my 1930 coupe. Removing the visor and windshield look pretty complicated to me. Can someone tell me the step by step procedure for this project? Tom B.

10-08-2015, 04:18 PM	#2
Big hammer Senior Member Join Date: Jun 2014 Location: Land of Lincoln Posts: 3,144	Re: 1930 windshield removal Sponsored Links (Register now to hide all advertisements) It's not hard to remove, on my 31 Tudor, swing the windshield forward, there are several screws up thru the hinge, get some helping hands or carefully support windshield and remove it. No need to remove anything else, at lease on my Tudor. When you have it on your work bench, in the upper corners of the frame are small screws to remove the glass. Very good screwdrivers are needed to get the screws out. Check out for other post it has been covered many times :-)