|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-11-2017, 11:24 AM | #1 |
Senior Member
Join Date: Oct 2015
Location: Canada
Posts: 414
|
Drip rail install / rain gutters, belt rail
I'm finishing up my sport coupe top on my early 28, just checking to see if the rain gutter look correct or if they should move forward / back or up/down before I secure them. As of right now, they are centred over the nails. Also, how snug do I fit the belt rail moulding, do I hammer it right right to the belt rail, snug, or a little loose to install the final trim, thanks in advance
Sent from my iPhone using Tapatalk |
07-14-2023, 07:26 PM | #2 |
Junior Member
Join Date: Mar 2022
Posts: 16
|
Re: Drip rail install / rain gutters, belt rail
I know this is an old post but hopefully you can answer my question. The base of your drip rail looks like mine. When I removed the drip rail to replace the top I forgot to take pictures of how it fit. Now that I'm replacing it, the drip rail seems to want to fit in the upper groove of the base piece (with a stretch and hammer) and no where near going over the entire base piece top to bottom as people are telling me it should be. If it does, can you tell me how you did it? Thanks ahead...
|
Sponsored Links (Register now to hide all advertisements) |
|
07-15-2023, 03:48 PM | #3 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,449
|
Re: Drip rail install / rain gutters, belt rail
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|