|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-10-2023, 11:59 AM | #1 |
Senior Member
Join Date: Oct 2019
Location: Virginia
Posts: 140
|
1935 Tudor Rear Side Window Removal
I have the window moulding, indoor side panel, and regulator removed. When I replaced the front door window, I was able to tilt the top of the pane in and pull it in and up to remove it. That doesn't work here at the back side window as I run interference either at the front or back depending how I position the pane. I tried rotating the pane 90 degrees but then I run into interference at the top. Does anyone know the secret handshake?
__________________
1929 Town Sedan (Briggs) 155B, Mitchell Overdrive 1935 Model 48 Tudor |
02-11-2023, 08:51 PM | #2 |
Senior Member
Join Date: Oct 2019
Location: Virginia
Posts: 140
|
Re: 1935 Tudor Rear Side Window Removal
Sponsored Links (Register now to hide all advertisements)
I wanted to disturb the headliner as little as possible and by so doing, failed to see that there is a piece of structure at the top rear corner that can be removed with three screws that greatly improves access. See the pictures. This still was not quite enough and I ended up removing the front vertical channel (pried out from between bendable tabs).
__________________
1929 Town Sedan (Briggs) 155B, Mitchell Overdrive 1935 Model 48 Tudor |
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|