Help - Front End is Off Center

[flybob08]

I just finished changing out the left front brake rod and as I was getting ready to change the right side I noticed that the left and right sides of the front end do not mirror each other.

The left side brake rod is much closer to the shock body than the right side brake rod. The left side dog bone for the shock tilts inward while the right side dog bone is straight. Finally, the left actuating lever is much closer to the dog bone than the right actuating lever.

I can't figure out what is wrong as both shock housing are mounted identically, the actuating levers appear to be symmetrical and the axle mounts appear to be symmetric.

Help

Thanks

Bob