|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-05-2011, 02:01 PM | #1 |
Banned
Join Date: Oct 2011
Location: Wash.
Posts: 233
|
Aluminum heads-too many threads
While reading thru back posts I keep coming to there being too many threads in alum. heads, and what's left of my mind keeps saying I remember something about this from years back, so last night I dug thru several boxes of old counter displays and handouts that I have collected. I found a handout by The Electric Auto-Lite Company, Toledo, Ohio; Sarnia, Ont. Form 809-A. It is called an "Auto-Lite Plug Check Indeicator" and is a pocket tool. On the reverse it lists heat ranges and plug numbers and styles. P=10mm, A=14mm, B=18mm and T=7/8ths by 18 thread plugs. In the A style plug they list A-7, AN-7, and AL-7, and list the AL-7 as being an extended reach plug for aluminum heads.
I wonder if any such similar plugs are available today? |
12-05-2011, 09:34 PM | #2 |
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,527
|
Re: Aluminum heads-too many threads
Yes there are. Just need to check through the plug catalogs.
|
Sponsored Links (Register now to hide all advertisements) |
|
12-06-2011, 05:25 AM | #3 |
Banned
Join Date: Oct 2011
Location: Wash.
Posts: 233
|
Re: Aluminum heads-too many threads
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|