09-28-2019, 09:28 AM | #1 |
Junior Member
Join Date: Sep 2019
Location: Pahrump Nv
Posts: 20
|
27 polarity
I have tried searching and read a lot of info on polarity on a 27. From what I have read It can go both ways. Just not good on the electrical for long periods. Which is it positive or negative ground? When I bought the truck the battery was not hooked up, so I have no clue. I would like to get this fired up and running. Also another thing I have wondered about is the head lights ect. no switches. Do these come on when it is switched to battery?
|
09-28-2019, 09:59 AM | #2 |
Senior Member
Join Date: May 2010
Location: Portland OR
Posts: 6,341
|
Re: 27 polarity
No, lights do not come one when switched to batt or mag. The key operates the batt/mag, the switch/lever part is for lights. Negative ground. I suggest you get an owners manual.
__________________
I know the voices aren't real but damn they have some good ideas! |
Sponsored Links (Register now to hide all advertisements) |
|
09-28-2019, 10:24 AM | #3 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 5,963
|
Re: 27 polarity
You should use the battery NEGATIVE ground.
|
09-28-2019, 10:39 AM | #4 |
Senior Member
Join Date: May 2010
Location: Tulsa OK
Posts: 476
|
Re: 27 polarity
Sponsored Links (Register now to hide all advertisements)
__________________
1910 Touring 1914 Touring 1915 Touring 1917 Torpedo Runabout |
|
|
Sponsored Links (Register now to hide all advertisements) |
|