|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-23-2018, 09:52 PM | #1 |
Senior Member
Join Date: Jun 2015
Posts: 1,414
|
SW sedan crossmember hole cover
Some posts questioned the rear cross member hole cover. Attached is a photo of what appears to be an after market metal cover. The holes are also in the pan for the fabric cover straps.
|
08-24-2018, 05:28 AM | #2 |
Senior Member
Join Date: May 2010
Location: Denville NJ
Posts: 964
|
Re: SW sedan crossmember hole cover
That takes a few pressings to make. Fords way was much cheaper using left over upholstery material.
__________________
Model A Ford Club of New Jersey http://www.mafcnj.org Model A Pick Up Owners and Enthusiasts https://www.fordbarn.com/forum/group.php?groupid=5 |
Sponsored Links (Register now to hide all advertisements) |
|
08-24-2018, 07:47 AM | #3 |
Senior Member
Join Date: May 2010
Location: Manlius New York
Posts: 169
|
Re: SW sedan crossmember hole cover
My original s/w has a fabric cover. Hopefully the picture is attached
|
08-24-2018, 08:27 AM | #4 |
Senior Member
Join Date: May 2010
Location: Jordan, MN
Posts: 1,411
|
Re: SW sedan crossmember hole cover
Somewhat off topic but...
I recently removed the fabric crossmember cover on a '31 Slant Windshield to replace a rear spring u-bolt because of a stripped thread. It would have been ugly if it had a riveted cover! Good Day! Last edited by Dave in MN; 08-24-2018 at 02:45 PM. |
08-24-2018, 09:00 PM | #5 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,552
|
Re: SW sedan crossmember hole cover
duke if you install a metal cover over the hole, your seat spring bottom will be ridding right on it. installing a fabric one is easy.
|
08-25-2018, 08:03 PM | #6 |
Senior Member
Join Date: Jun 2015
Posts: 1,414
|
Re: SW sedan crossmember hole cover
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|