The Ford Barn

1928Tudor · 09-30-2015, 12:09 AM

Hi
My model A has a Kunkel Heater installed (at least that is what the vent says that is on the floor). The manifold that connects to the heater is broken on top, Any suggestions on how one might be able to see about finding a replacement? I know this is probably a difficult task.,

J Franklin · 09-30-2015, 12:30 AM

Post a Photo, sounds interesting.

Tom Wesenberg · 09-30-2015, 02:36 AM

Both cast iron and aluminum can be welded. I'd also like to see a picture.

C26Pinelake · 09-30-2015, 03:14 AM

If you are near Hershey, that is a great parts source! Wayne

Dave in MN · 09-30-2015, 04:02 PM

Sponsored Links (Register now to hide all advertisements)

I purchased a load of parts about two years ago that must have had 25 heater manifolds included of all makes and designs. There were probably 8-10 floor/firewall vents included also. I do not remember seeing Kunkel on any of them.
I'd be interested in seeing some photos also. Maybe I can help you identify what you have.
Good Day!

TinCup · 09-30-2015, 05:02 PM

I would love to find one of these so I don't have to cut the firewall

09-30-2015, 12:09 AM	#1
1928Tudor Junior Member Join Date: Sep 2015 Posts: 3	Kunkel Heater Hi My model A has a Kunkel Heater installed (at least that is what the vent says that is on the floor). The manifold that connects to the heater is broken on top, Any suggestions on how one might be able to see about finding a replacement? I know this is probably a difficult task.,

09-30-2015, 12:30 AM	#2
J Franklin Senior Member Join Date: May 2010 Location: Oregon Posts: 5,963	Re: Kunkel Heater Post a Photo, sounds interesting.

09-30-2015, 02:36 AM	#3
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Kunkel Heater Both cast iron and aluminum can be welded. I'd also like to see a picture.

09-30-2015, 03:14 AM	#4
C26Pinelake BANNED Join Date: May 2010 Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto. Posts: 5,800	Re: Kunkel Heater If you are near Hershey, that is a great parts source! Wayne

09-30-2015, 04:02 PM	#5
Dave in MN Senior Member Join Date: May 2010 Location: Jordan, MN Posts: 1,411	Re: Kunkel Heater Sponsored Links (Register now to hide all advertisements) I purchased a load of parts about two years ago that must have had 25 heater manifolds included of all makes and designs. There were probably 8-10 floor/firewall vents included also. I do not remember seeing Kunkel on any of them. I'd be interested in seeing some photos also. Maybe I can help you identify what you have. Good Day!

09-30-2015, 05:02 PM	#6
TinCup Senior Member Join Date: May 2010 Location: OKC / Tonkawa, Ok. Posts: 1,977	Re: Kunkel Heater I would love to find one of these so I don't have to cut the firewall __________________ Oklahoma City Model A Restorers Group.