03-11-2017, 08:28 PM | #1 |
Senior Member
Join Date: Feb 2016
Location: central minn
Posts: 1,025
|
tail pipe
were can a buy tail pipe for a 1953 ford car looking for duals
|
03-12-2017, 11:37 AM | #2 |
Senior Member
Join Date: May 2010
Location: Racine, WI
Posts: 472
|
Re: tail pipe
|
Sponsored Links (Register now to hide all advertisements) |
|
03-12-2017, 11:37 AM | #3 |
Senior Member
Join Date: Feb 2016
Location: central minn
Posts: 1,025
|
Re: tail pipe
I looked on ebay did not find any
|
03-12-2017, 01:48 PM | #4 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,436
|
Re: tail pipe
Fords that have the front mounted cross over pipe may require a change of exhaust manifolds to get a better shot for duals. A good muffler shop may be able to form up a set for you but you might have to ask around to find out what shop might be the best bet.
|
03-12-2017, 01:58 PM | #5 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,319
|
Re: tail pipe
Decided to pass on the '51, eh? Good choice.
As to tailpipes, I think a stocker will work on both sides. The problem is the exhaust pipe. Unless you do some more changes, it comes off the front of the drivers side exhaust manifold and loops up and back over the steering and dives down under the toeboard. The "Waldron" site mentioned above has a picture of their complete system. The driver's side headpipe is right about in the middle of the picture. |
03-12-2017, 02:22 PM | #6 |
Senior Member
Join Date: May 2010
Location: Southern France
Posts: 5,306
|
Re: tail pipe
|
03-12-2017, 02:47 PM | #7 |
Senior Member
Join Date: Feb 2016
Location: central minn
Posts: 1,025
|
Re: tail pipe
it has header on it so that not the problem
|
03-12-2017, 02:51 PM | #8 |
Senior Member
Join Date: Feb 2016
Location: central minn
Posts: 1,025
|
Re: tail pipe
yep I just need the tail pipes only I email him last night
|
03-12-2017, 02:56 PM | #9 | |
Senior Member
Join Date: Feb 2016
Location: central minn
Posts: 1,025
|
Re: tail pipe
Quote:
I looked on the site and seen it |
|
03-12-2017, 09:52 PM | #10 |
Senior Member
Join Date: Feb 2016
Location: central minn
Posts: 1,025
|
Re: tail pipe
he got back to me it is 175.00 with shipping
there is a guy does exhaust bending about 40 miles away I heard he does good work and is neat I had couple done at a shop in town I had a pipe fall of after a week he it weld a quarter of a inch |
|
|
Sponsored Links (Register now to hide all advertisements) |
|