|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-01-2019, 03:11 PM | #1 |
Member
Join Date: Aug 2010
Location: coraopolis. pa
Posts: 70
|
31 slant window glass chanel
I am working on my front passenger door glass on my 31 slant widow. The glass had a crack in it and I decided to make a winter project out of it. I disassemble the old glass and had a new one cut. Now I am attempting to reassemble and do not remember which side of the window channel faces inward when putting it on the glass. Pictures would help.
thanks bob |
01-01-2019, 08:09 PM | #2 |
Senior Member
Join Date: Jun 2015
Posts: 1,414
|
Re: 31 slant window glass chanel
Before installing glass in channel, take the loose channel and see how it fits with the regulator arms rollers. .The arms should be on the inside face of the installed channel slots and so that the rollers slide in the channel track..
|
Sponsored Links (Register now to hide all advertisements) |
|
01-01-2019, 11:11 PM | #3 |
Senior Member
Join Date: Dec 2014
Location: Shawnee, Ok
Posts: 3,471
|
Re: 31 slant window glass chanel
If this is what you are talking about...
the two inner holes, the dimpled recess should be in towards the door.
__________________
Keith Shawnee OK '31 SW 160-B |
01-02-2019, 01:29 PM | #4 |
Member
Join Date: Aug 2010
Location: coraopolis. pa
Posts: 70
|
Re: 31 slant window glass chanel
burner 31
If looking at your picture and that is the way it is installed, what I am seeing is the inside or interior of the car. correct? |
01-02-2019, 05:48 PM | #5 |
Senior Member
Join Date: Dec 2014
Location: Shawnee, Ok
Posts: 3,471
|
Re: 31 slant window glass chanel
Yes, as you are working on it/looking at it
__________________
Keith Shawnee OK '31 SW 160-B |
01-03-2019, 01:42 PM | #6 | |
Senior Member
Join Date: Jun 2015
Posts: 1,414
|
Re: 31 slant window glass chanel
Sponsored Links (Register now to hide all advertisements)
Quote:
|
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|