|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-18-2015, 03:02 PM | #1 |
Member
Join Date: Jan 2014
Location: Springfield, mo
Posts: 39
|
signal stat (again)
I installed a signal stat 900 in my ccpu. Have all the wires wired as in the diagram. Before I installed the lights, I tested the circuit. 6 volts were going to all wires when signals engaged. I installed the lights and the volts dropped to 3.44. I unhook the light and the wires go to 6 volts again. I have tried 3 different flashers with the same result. I have a seperate grounding wire from the switch to the frame. Any thoughts?
|
06-18-2015, 04:45 PM | #2 |
Member
Join Date: Jan 2014
Location: Springfield, mo
Posts: 39
|
Re: signal stat (again)
I have them working!!!!!!!!!!!!!!
|
Sponsored Links (Register now to hide all advertisements) |
|
06-19-2015, 10:29 AM | #3 |
Senior Member
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
|
Re: signal stat (again)
Sponsored Links (Register now to hide all advertisements)
Bill W.
__________________
"THE ASSISTANT GURU OF STUFF" |
|
|
Sponsored Links (Register now to hide all advertisements) |
|