|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-25-2014, 06:12 PM | #1 |
Senior Member
Join Date: Sep 2010
Location: Danville, CA
Posts: 1,554
|
Float a Motors or stock mounts
Which is best and why?
|
08-25-2014, 07:28 PM | #2 |
Senior Member
Join Date: Mar 2013
Location: Green Bay Wi
Posts: 400
|
Re: Float a Motors or stock mounts
I restored a 1931 a 2dr had the original mounts in at first then when snyders announced the float a motor kit I was game and tried it the best improvement that I could have made vibration cut way down very smooth running and very easily to install
|
Sponsored Links (Register now to hide all advertisements) |
|
08-25-2014, 07:37 PM | #3 |
Senior Member
Join Date: May 2010
Posts: 1,369
|
Re: Float a Motors or stock mounts
The late "Spike" here on fordbarn told me, you can put a rag over a pile of dog ^%$#, but it's still there, meaning it masks a problem. That being said, I put floats on my coupe, and it made a world of difference.
|
08-25-2014, 07:58 PM | #4 |
Senior Member
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
|
Re: Float a Motors or stock mounts
OH NO!
Ur we gonna' RAG about FAMS AGAIN? If you want your car to be smoother & quieter, put in those RUBBER mounts, jist like dear Ol' Henry did on the later Fordmobiles.
__________________
"THE ASSISTANT GURU OF STUFF" |
08-25-2014, 08:34 PM | #5 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Float a Motors or stock mounts
Just make sure you use detergent oil on the threads when you bolt it in place.
Last edited by Tom Wesenberg; 08-26-2014 at 08:27 AM. |
08-25-2014, 08:46 PM | #6 |
Member
Join Date: Jun 2013
Location: KY
Posts: 81
|
Re: Float a Motors or stock mounts
Sponsored Links (Register now to hide all advertisements)
|
08-25-2014, 09:04 PM | #7 |
Senior Member
Join Date: May 2010
Location: South East NJ
Posts: 3,398
|
Re: Float a Motors or stock mounts
The first bunch of production A's had Ford's version of a float a motor and they quickly changed to the solid.
The original engine gets a pretty bad rap today because of vibrations. The problem is the original factory engine was tightly balanced. Most engines today are thrown together and the people do not own the scales or tooling to get the few gram balance of the moving parts and the close tolerence crank shaft grinding. The results are engines with vibrations and lower top end RPM. So out of necessity some have to resort to FAM as they do not want or likely can not afford to have their engine rebuilt back to Ford specs. It is very hard to get close to Ford factory specs when you rebuild the engine. The solid mounts are also structural with the frame giving it some rigidity. The A frame is VERY flexible, you might be surprised how easy it flexes if you have it mounted at a central point. |
08-25-2014, 09:23 PM | #8 | |
Senior Member
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
|
Re: Float a Motors or stock mounts
Quote:
Bill W.
__________________
"THE ASSISTANT GURU OF STUFF" |
|
08-25-2014, 09:39 PM | #9 |
Senior Member
Join Date: Jul 2010
Location: Wichita Falls, Texas
Posts: 983
|
Re: Float a Motors or stock mounts
I have owned several A's from a early 28 with the rigid front mounts to a 31 Victoria with a float a motor and a couple in between with stock mounts. The balanced engine and lightened flywheel is the best. I have that configuration on my early 28 and my 31cabriolet. Although the unbalanced engines in my 31 Victoria and 31 slant window sedan ran well, they vibrated more at higher RPM's than the balanced engines. Even with the float a motor.
|
08-25-2014, 10:13 PM | #10 |
Senior Member
|
Re: Float a Motors or stock mounts
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
08-26-2014, 08:32 AM | #11 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Float a Motors or stock mounts
I'm still seeing confusion about the terms "couterweighted" or "counterbalanced" and "balanced".
|
08-26-2014, 12:31 PM | #12 |
Senior Member
Join Date: Jun 2010
Location: (Old)Shasta (Redding) CA
Posts: 385
|
Re: Float a Motors or stock mounts
Tom, RE: "Just make sure you use detergent oil on the threads when you bolt it in place."
I used 600 wt, do you think it will be ok? jb |
05-20-2019, 10:38 PM | #13 |
Junior Member
Join Date: Jul 2017
Posts: 9
|
Re: Float a Motors or stock mounts
asking here what is detergent oil ...thanks
|
05-20-2019, 11:53 PM | #14 |
Senior Member
Join Date: Aug 2018
Posts: 2,332
|
Re: Float a Motors or stock mounts
Almost all automotive oil today is detergent oil. Detergent oil is formulated to keep contaminants suspended in the oil so when the oil is drained the contaminants are drained out with the oil. Non detergent oil does not do this, and what happens over time the contaminants cling to surfaces or settles in the bottom of the motor/oil pan. Over years you end up with a thick coat of sludge, sometimes a half inch or more. Detergent oil was not available in the 30s, not sure when it was 1st available. Sludge will wreck an engine, clog up oil passages, clog up oil pumps - not a good thing. If an oil is non-detergent it is labeled non-detergent. If not labeled non-detergent, the oil is detergent. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|