|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
|
05-28-2020, 02:40 PM | #1 |
Senior Member
Join Date: Jul 2017
Location: Eastern Oregon
Posts: 205
|
2 post car lift
Howdy boys, your thoughts on which would be the best for Model A's. Thanks
|
05-28-2020, 02:44 PM | #2 |
Senior Member
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 4,104
|
Re: 2 post car lift
They do work! Seabees Great! 1969-1991 BUC Ret
__________________
www.whidbeymodelaclub.com |
Sponsored Links (Register now to hide all advertisements) |
|
05-28-2020, 05:55 PM | #3 |
BANNED
Join Date: Dec 2019
Posts: 1,196
|
Re: 2 post car lift
CM,NMCB40,77-82
Its not the lift,its where you lift it from..always the axles,never the frame |
05-30-2020, 09:57 AM | #4 | |
Senior Member
Join Date: May 2010
Location: Camarillo, CA and Pine Grove, CA
Posts: 2,832
|
Re: 2 post car lift
Quote:
That doesn't work out real well if you need to drop an axle or remove suspension.
__________________
1921 Runabout 1930 Tudor Early 1930 AA Speed costs money. How fast do you want to go? |
|
05-28-2020, 06:19 PM | #5 |
Senior Member
Join Date: Jul 2017
Location: Eastern Oregon
Posts: 205
|
Re: 2 post car lift
Thanks guys, CM2 Adak '72-'75. I've been thinking about a lift for several years. The problem is room. My shop is 36x36, but at this late day in the game, it is filled with tools, parts, and rigs being worked on. Still, I ain't getting any younger, and it seems harder to get up off the damn creeper every time I use it! The biggest problem is my floor. The concrete is cracked here and there and I'm a little skittish about setting one up on it. If I did, I think it would be in my best interest to dig a couple holes, pour a couple blocks at least 3x3x3, and mount the lift to that. Your thoughts. Thanks!
|
05-28-2020, 06:36 PM | #6 |
Senior Member
Join Date: Jun 2011
Location: West Point, VA 23181
Posts: 373
|
Re: 2 post car lift
Sponsored Links (Register now to hide all advertisements)
R/ Roger. CMC, 1981-2007 |
05-28-2020, 07:34 PM | #7 |
Senior Member
Join Date: Jun 2015
Posts: 1,414
|
Re: 2 post car lift
Are you asking about what type of lift to use, 2 post vs. 4 post, etc ? You need a stout foundation like you alluded to for the 2 poster to receive multiple bolts. We use a 4 poster in seismic country which depending on mfg. can be anchored to a min. 4" slab. Some say anchoring is not required depending on one's location. I prefer the 4 posters for storing vehicles.
|
05-28-2020, 10:23 PM | #8 |
Senior Member
Join Date: Jul 2017
Location: Eastern Oregon
Posts: 205
|
Re: 2 post car lift
Thanks Duke, yes, I am more inclined to use a 2 post. Mostly considering the room I have. I don't think I'd trust my floor to mount one on. Like I noted above, I'll have to pour a pad for each post I'm afraid.
|
05-28-2020, 11:14 PM | #9 |
Senior Member
Join Date: Jun 2010
Location: College Station, Tx
Posts: 326
|
Re: 2 post car lift
I have a challenger le10 2 post works great for me you will need the adapter kit also
|
05-29-2020, 01:09 AM | #10 |
Senior Member
Join Date: May 2010
Posts: 319
|
Re: 2 post car lift
The instructions for my two post said 4 inches minimum. I have about 12 at the posts with 9 inch anchors, just because. I would cut out your floor and pour new pads, maybe 6 inches, with tie bars drilled back into existing floor. Your 3 X 3 would work or 2 X 4. Even if you buy a used one, like I did, contact the manufacturer and get THEIR instructions. It ain't rocket science.
|
05-29-2020, 05:29 AM | #11 |
Senior Member
Join Date: Jan 2016
Posts: 2,098
|
Re: 2 post car lift
I have been using this lift for many years with the A and could not be happier with it.
It takes 10-15 minutes to set it up, placing the lift pads around brake rods, muffler, etc. 2 pads go on the frame in the back just before the shocks and 2 pads go on the frame in the front near the bell motor mounts. https://www.gregsmithequipment.com/A...SABEgJJQfD_BwE |
05-30-2020, 07:23 AM | #12 |
Senior Member
Join Date: May 2010
Posts: 337
|
Re: 2 post car lift
hi could ya show pictures of the pads in place thanks Charles..
|
05-29-2020, 07:49 AM | #13 |
Senior Member
Join Date: May 2010
Location: Spruce Pine, NC
Posts: 1,458
|
Re: 2 post car lift
Backyard Buddy.
safest lift available.
__________________
our next Model A is out there in the unknown...... |
05-29-2020, 08:50 AM | #14 |
Senior Member
Join Date: Jul 2017
Location: Eastern Oregon
Posts: 205
|
Re: 2 post car lift
Howdy boys, thanks for the comments! I live in Oregon, so I'll check out Greg Smith in Portland. 200 miles away, but, so's everything else! I'll check out Back Yard Buddy too.
|
05-30-2020, 10:22 AM | #15 |
Senior Member
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,046
|
Re: 2 post car lift
W/a 2 post lift you need one of these adapters:
__________________
If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn! |
05-30-2020, 12:03 PM | #16 | |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,516
|
Re: 2 post car lift
Quote:
Where is all of this coming from? From my experience with 2 post lifts used on Model-As (-which is almost daily for the past 20 years), I have never observed any adverse situation regarding the frame. The only issue that you can encounter is the brake rods to the front will bend when the front axle is dangling however as soon as the vehicle is returned to the ground, the brake rod returns to its normal position. It definitely is not because the frame will sag or bend!! As kinda stated above, the main reason for using a 2-post lift is for convenience of servicing components underneath the vehicle. It is not meant for long-term storage. . |
|
06-03-2020, 01:53 PM | #17 | |
Senior Member
Join Date: Jan 2016
Posts: 2,098
|
Re: 2 post car lift
Quote:
|
|
06-03-2020, 01:59 PM | #18 | |
Senior Member
Join Date: Jun 2010
Location: 34.22 N 118.36 W
Posts: 1,056
|
Re: 2 post car lift
Quote:
I'll pay the shipping for it!!
__________________
As Carroll Smith wrote; All Failures are Human in Origin. |
|
06-03-2020, 02:10 PM | #19 | |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,516
|
Re: 2 post car lift
Quote:
Funny. That tank has already been restored, re-installed, and out of here! . . |
|
05-30-2020, 11:23 PM | #20 |
Senior Member
Join Date: Oct 2019
Location: Washington
Posts: 175
|
Re: 2 post car lift
Brent, how tall are the risers you are using to lift from the frame? Don
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|