|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-20-2012, 01:33 PM | #1 |
Senior Member
Join Date: Apr 2012
Location: Saint Helena, California
Posts: 252
|
16 Inch Wheel Trim Rings
Happy Holidays to All,
I'm am in the middle of bringing a 34 coupe back to near original condition with a few minor tweaks. One is I have a set of 16" Kelsey Hayes wheels that I want to run in place of the factory 17 inch wheels. I would like to find a set of original 16" wheel trim rings to go with the wheels but from the lack of replies on the "wanted ads." on both the H.A.M.B. and Ford Barn web sites for originals, I'm thinking there's probably little chance of finding a decent set. Therefore I thought I would ask on the Forum if there was a particular manufacturer that offered the best repo rings? I'm wondering if they are all the same or if there is a better wheel ring out there I should purchase? Comments are appreciated. Thanks, Tom |
12-20-2012, 02:27 PM | #2 |
Senior Member
Join Date: Oct 2012
Location: oroville calif.
Posts: 1,453
|
Re: 16 Inch Wheel Trim Rings
Dennis Carpenter lists them, they are stainless steel, pricey, $25 apiece ,his number 1 800 476 9653
|
Sponsored Links (Register now to hide all advertisements) |
|
12-20-2012, 02:44 PM | #3 |
Senior Member
Join Date: May 2010
Location: Southern France
Posts: 5,308
|
Re: 16 Inch Wheel Trim Rings
Bob Drake also stocks them and they are pretty nice.Try the Early Ford Store in San Dimas,CA 909-305-1955.He might have an original set.They are very common at swap meets.
|
12-20-2012, 02:51 PM | #4 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 7,033
|
Re: 16 Inch Wheel Trim Rings
After I put a set on my Kelseys I decided I didn't like them and took them off. Be sure they are what you want.
Charlie Stephens |
12-20-2012, 02:57 PM | #5 |
Senior Member
Join Date: May 2010
Location: Lake City Mi.
Posts: 807
|
Re: 16 Inch Wheel Trim Rings
I bought mine at hubcapmike.com & was pleased. He has quite a selection.
Gary |
12-20-2012, 03:10 PM | #6 |
Senior Member
Join Date: May 2010
Location: South California
Posts: 6,188
|
Re: 16 Inch Wheel Trim Rings
Sponsored Links (Register now to hide all advertisements)
Can you show pic of trim ring that your after? Anyone know if there are diff configurations/shapes of same ring, i.e.-16". I ask, because for a loong time I've had a set of four new 16" rings wraped/stored in a shed...and don't know if repro/what? |
12-20-2012, 04:15 PM | #7 |
Senior Member
Join Date: Oct 2012
Location: oroville calif.
Posts: 1,453
|
Re: 16 Inch Wheel Trim Rings
ford is smooth merc has a wave? grove ? in them
|
12-20-2012, 04:29 PM | #8 |
Senior Member
Join Date: Sep 2012
Location: Kitsap Peninsula, Western WA
Posts: 276
|
Re: 16 Inch Wheel Trim Rings
Recently purchased a 16" set from C&G Early Ford Parts. Very happy with the quality.
|
12-20-2012, 04:54 PM | #9 |
Senior Member
Join Date: Apr 2012
Location: Saint Helena, California
Posts: 252
|
Re: 16 Inch Wheel Trim Rings
Thanks for all the comments and suggestions! Tom
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|