|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
 |
|
Thread Tools | Display Modes |
03-02-2024, 12:50 PM
|
#1 |
|
Senior Member
Join Date: May 2010
Location: Marietta, GA
Posts: 1,100
|
Bumper identification
Could use some help identifying this bumper. Overall length is 62 inches. If I need to provide any more specifics, let me know. Thanks Fordbarn members!
__________________
1940 Mercury Looking for DENVER heads - 81AS - 99AS - 19AS |
|
|
|
03-02-2024, 12:58 PM
|
#2 |
|
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,950
|
Re: Bumper identification
It looks to be OEM as it has the raised ridges on the back. What are the center to center measurements of the bolt holes and their distances from the end of the bumper?
Is your over all length measurement measured straight across from tip to tip OR measured with a cloth tape placed along the contour of the bumper? |
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
03-02-2024, 01:05 PM
|
#3 |
|
Senior Member
Join Date: May 2010
Location: Marietta, GA
Posts: 1,100
|
Re: Bumper identification
The 2 middle bumper holes are 29 inches apart. The outside bumper holes are about 5 inches from the end and about 16 1/2 inches from the middle bumper holes.
The overall measurement is from tip to tip as close as I could read with a metal tape measure.
__________________
1940 Mercury Looking for DENVER heads - 81AS - 99AS - 19AS |
|
|
|
|
03-02-2024, 01:17 PM
|
#4 | |
|
Senior Member
Join Date: May 2015
Posts: 8,156
|
Re: Bumper identification
Quote:
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
|
|
|
|
|
03-07-2024, 10:39 PM
|
#5 |
|
Senior Member
Join Date: May 2010
Location: Marietta, GA
Posts: 1,100
|
Re: Bumper identification
19Fordy - any additional help after I posted the info you requested? Thanks!
__________________
1940 Mercury Looking for DENVER heads - 81AS - 99AS - 19AS |
|
|
|
|
03-07-2024, 11:02 PM
|
#6 |
|
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,950
|
Re: Bumper identification
Sponsored Links (Register now to hide all advertisements)
Perhaps a truck???? |
|
|
|
|
03-07-2024, 11:09 PM
|
#7 |
|
Senior Member
Join Date: May 2010
Location: middle of Iowa
Posts: 647
|
Re: Bumper identification
My guess is 40 Merc rear.
|
|
|
|
|
03-08-2024, 08:16 AM
|
#8 |
|
Senior Member
Join Date: May 2010
Posts: 192
|
Re: Bumper identification
1937 Coupe rear.
|
|
|
|
|
03-08-2024, 09:39 AM
|
#9 | |
|
Senior Member
Join Date: May 2010
Location: Southern Illinois
Posts: 3,795
|
Re: Bumper identification
Quote:
|
|
|
|
|
|
03-08-2024, 05:36 PM
|
#10 |
|
Senior Member
Join Date: May 2010
Location: Marietta, GA
Posts: 1,100
|
Re: Bumper identification
Thanks guys for the input. I’ll see if I can track down a local guy with a 37 Ford and see
__________________
1940 Mercury Looking for DENVER heads - 81AS - 99AS - 19AS |
|
|
|
|
03-15-2024, 08:05 AM
|
#11 |
|
Senior Member
Join Date: May 2022
Location: Lakeland Florida
Posts: 377
|
Re: Bumper identification
It might be a 38…the ends curve down on 38, and are flipped over (curving up) on 37
|
|
|
|
|
03-15-2024, 07:26 PM
|
#12 |
|
Senior Member
Join Date: May 2010
Posts: 192
|
Re: Bumper identification
1937 Coupe only it is longer than sedans. 1938 will not clear the fenders.
|
|
|
|
|
03-25-2024, 10:36 AM
|
#13 |
|
Junior Member
Join Date: Feb 2024
Posts: 19
|
Re: Bumper identification
Have to check mine
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
Linear Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 11:24 AM.