Where to get gas tank?

If its not stock and you have some rust in the trunk, do what we did, put in a gas tank from a Mustang, not much money and it takes care of to problems.

went thru same bs with my 46 last summer. four tows lots of aggravation bought poly tank from TANKS INC around 220 plus shipping had it in less than a week. i'm using a vdo guage and sender outlet is at rear of tank fill hose and mount were in correct location

mike

I need to clean the tank in my '47. The eastwood kit is about $50 plus extra supplies you need locally. I was talking to the PO who said he had that problem years ago. Thinking now maybe I should drop for a new tank. Hoping for something under $200. I see drake's got em for about $250. I don't have that to drop on a gas tank.



Can napa get em?

Tanks Inc. has poly tanks that may be cheaper



320-558-6882 Clearwater, MN

If you tank is not rusted out, get the gas tank repair kit from POR-15. It contains everything you need to fix your tank where it will last longer than you will. First step is the Marine Clean compound which gets rid of the rust and cleans down to bare metal. The next step is a solution that etches the metal where the sealer will bond to it. Final step is the sealer. Do it exactly by the instructions and you will have no more trouble with your gas tank.

Sponsored Links (Register now to hide all advertisements)

I've seen por 15 gas tank sealer, but never a full kit from them. Who has that, and what does it run? If I gotta lay out $100 just to clean mine, I'll go for new at $250.

www.por15.com

As best as I can remember, it was around $60 for the kit.

SAcramento Vintage Ford has the Por kit in stock, just bought one

I got one from bob drake and it was beautiful. but the gauge has to be one of his.

I do have a new one if you need it ,price is $ 25.00 ? his is $ 35.00. so if you need it let me know .OK Thanks Mark

I got a tank for my 41 pickup from Drake, but I used the sender I got with my Auto-Meter guages.