|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
|
08-29-2017, 02:58 PM | #1 |
Senior Member
Join Date: Nov 2010
Location: SPRUCE PINE NC
Posts: 446
|
29 Tudor gas tank welt
I know that there is a welt that goes between the gas tank and the body (and it needs to be painted the body color) But is there anything that goes between the gas tank and the cowl side panels & the firewall?
If nothing goes there, is it a good idea to put something to prevent squeaks? If so what? See picture please |
08-29-2017, 03:45 PM | #2 |
Senior Member
Join Date: May 2010
Location: Georgetown Divide Kelsey ca
Posts: 868
|
Re: 29 Tudor gas tank welt
Cloth friction Tape.
__________________
Dennis in Kelsey ca |
Sponsored Links (Register now to hide all advertisements) |
|
08-31-2017, 04:35 PM | #3 |
Senior Member
Join Date: Nov 2010
Location: SPRUCE PINE NC
Posts: 446
|
Re: 29 Tudor gas tank welt
That what I was thinking.
It is hard to believe that some big box home improvement stores employees don't even know what cloth friction tape is!!!! I restored a 1954 Piper Super Cub for a friend and friction tape was the product of choice for all areas that needed chafe protection. You know that Henry and Piper were buddies!! That's why all Model A and Piper Cub restorations always use a big hammer for assembly!! |
08-31-2017, 05:40 PM | #4 | |
Senior Member
Join Date: Jun 2014
Location: Land of Lincoln
Posts: 3,131
|
Re: 29 Tudor gas tank welt
Quote:
__________________
Don't force it with a little hammer tap, tap, tap get a bigger hammer tap done |
|
08-29-2017, 03:53 PM | #5 |
Senior Member
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
|
Re: 29 Tudor gas tank welt
Ted (RIP) HATED welt. He'd caulk the cracks, smoothly & have his Striper paint the caulking! NOBODY ever criticized him.
Bill W.
__________________
"THE ASSISTANT GURU OF STUFF" |
08-31-2017, 04:41 PM | #6 |
Senior Member
Join Date: May 2010
Location: Lakeville, MN
Posts: 5,164
|
Re: 29 Tudor gas tank welt
Sponsored Links (Register now to hide all advertisements)
Rusty Nelson |
08-31-2017, 05:12 PM | #7 |
Senior Member
Join Date: May 2010
Location: Georgetown Divide Kelsey ca
Posts: 868
|
Re: 29 Tudor gas tank welt
I used Gorilla glue to hold the tape and just removed the gas tank again and the tape is still tight found a better tank.
__________________
Dennis in Kelsey ca |
08-31-2017, 11:47 PM | #8 |
Junior Member
Join Date: Sep 2012
Posts: 16
|
Re: 29 Tudor gas tank welt
I got mine at Snyders antique auto parts. Its called gas tank anti-squeak . part # A-9299-S $2.50 Hope this helps . Bob..........................
|
09-01-2017, 11:24 AM | #9 |
Senior Member
Join Date: May 2010
Location: Santee, California
Posts: 3,505
|
Re: 29 Tudor gas tank welt
I used the same material the vendors sell for the top of the running board brackets. It's thicker than friction tape, and makes the fit of the cowl pieces a bit tighter. It made getting the welting on top of the tank more difficult at the left and right corners. I would suspect one can do without anything with as many fasteners as are involved.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|