Handle identification

[wrndln]

I have a handle I originally thought was for a 28/29 CCPU. However its has too sharp of ends. I don't know what it is for. It kind of looks like an open car handle, however as you can see, it has a insert in the handle. If anyone knows what this handle fits, would you please post a response?
Rusty Nelson

[chopo]

old camper int. door handle

[Fordors]

I think Model A and B and also Model 40 open cars. If shank is long could also be from a BB truck rear door, and naturally could be cut down if desired.

[lindy williams]

The outside door handle appears to be a late '28 or '29 door handle for a Model A roadster or phaeton. These models started with outside handles in late '28 and they were brass clad, nickel plated and the bezel is flat on the back side unlike '30-31 handles.

[wrndln]

Sponsored Links (Register now to hide all advertisements)

I didn't think 28/29 open cars had a black inset in the handle like this one does. The black stuff looks like some kind of thin plastic, but I don't think Ford used plastic in 28 or 29. I know open car outside handles have tapped holes for attaching the inside handles, so I will look to see if it has a hole in the end of the square shaft like open car handles do.
Rusty Nelson