|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-04-2016, 09:54 PM | #1 |
Senior Member
Join Date: Jul 2010
Posts: 426
|
aoogah horn connections
Does it matter which side the wires go on when connecting the horn from the wiring harness?
It's a new Sparton horn from Bratton's if that makes any difference. The instructions just say "Plug in the wires." |
03-04-2016, 10:10 PM | #2 |
Member
Join Date: Nov 2015
Location: Edgerton, Kansas
Posts: 42
|
Re: aoogah horn connections
No difference......
|
Sponsored Links (Register now to hide all advertisements) |
|
03-04-2016, 10:34 PM | #3 |
Senior Member
Join Date: Jul 2010
Posts: 426
|
Re: aoogah horn connections
Thanks Rick.
|
03-05-2016, 12:12 AM | #4 |
Senior Member
Join Date: Sep 2015
Location: Oregon
Posts: 238
|
Re: aoogah horn connections
FWIW: the horn is always hot, the button on the steering wheel completes the circuit. Positive ground is a natural ground not negative. Run a positivecground wire to your frame, body and transmission. Draw a circuit diagrahm to see whats going on with out these grounds.
__________________
They know enough who know to learn. |
03-05-2016, 07:15 AM | #5 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: aoogah horn connections
Read post #17 from MikeK on the correct way to install the horn wire connections. Many make the mistake on installing the pigtail ends incorrectly.
http://fordbarn.com/forum/showthread...highlight=Horn |
03-05-2016, 02:20 PM | #6 |
Senior Member
Join Date: Jul 2010
Posts: 426
|
Re: aoogah horn connections
Sponsored Links (Register now to hide all advertisements)
Works fine every time. Thanks Guys |
|
|
Sponsored Links (Register now to hide all advertisements) |
|