1933-34 front motor mounts?

[lotsagas4u]

OK, ordered the rear rubber, real USA vulcanized, correct grooves in rubber, engine/transmission mount ring, today from All Ford Parts. They did not have any front mounts. Who has the correct mounts with steel in them? Thanks in advance.

[DavidG]

Bob Drake, at least in the recent past.

[JM 35 Sedan]

Originally Posted by lotsagas4u

OK, ordered the rear rubber, real USA vulcanized, correct grooves in rubber, engine/transmission mount ring, today from All Ford Parts. They did not have any front mounts. Who has the correct mounts with steel in them? Thanks in advance.

I guess I'm thinking you are talking about the rubber donuts with steel rings around the OD, as David is probably thinking, or are you possibly talking about the motor mounts/water inlets that bolt to the front of the engine on each side and extend out enough to sit on top of the rubber donuts??

[lotsagas4u]

Looking for the correct donuts, bolts, cap, and washers. I think they have steel in them, with rubber molded around it. Thanks

Bob Drake is out of stock.

[deuce lover]

Try one of the vendors like C & G,Early Ford Store,Sacramento Vintage etc.

[bobH]

Sponsored Links (Register now to hide all advertisements)

I would also suggest trying to find the Drake mounts, as suggested. I used another source first (I've forgotten which), and they were weak, unsatisfactory, and squashed in no time. The ones I got from Drake worked perfectly and held up. As deuce lover suggested, one of the vendors will probably have them.
And, by-the-way, for anyone who might want to know, I've got extra motor mount brackets / water inlets, for a 34 -- available.

[svm99]

If you do find the Drake motor mounts please post who has them....................I've been unable to find a set. Drake said in January they would again be manufacturing them, no firm date yet though.
Paul J.

[lotsagas4u]

Called them this morning, a bunch of sets due in the last of this month