|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-16-2024, 04:43 AM | #1 |
Senior Member
Join Date: May 2012
Location: Fredericksburg, Virginia
Posts: 765
|
Rebuilt '30-'31 generator with cutout
City:
FREDERICKSBRG
State:
Va
Price:
$275
SOLD!
The armature was tested for opens, shorts and grounds. The commutator was serviced and the windings sealed with Glyptal. Modern field coils were installed with new brushes, new sealed bearing and new bushing. New terminal hardware and oiler. The original Ford cutout was serviced including checking point alignment and adjusting point gap, checking air gap and adjusting closure voltage. It was painted to simulate the original finish and new hardware and insulators were installed. Tested and output set to 4-5 amps on my test stand. Photos below. I can email a video of it running on my test stand. Price is $275 plus shipping & insurance from Fredericksburg Virginia. Last edited by ndnchf; 02-16-2024 at 10:46 AM. |
02-16-2024, 10:45 AM | #2 |
Senior Member
Join Date: May 2012
Location: Fredericksburg, Virginia
Posts: 765
|
Re: Rebuilt '30-'31 generator with cutout
Sponsored Links (Register now to hide all advertisements)
|
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|