Holley 4000 teapots who rebuilds em?

[mikhett]

Im looking to have my holley 4000 carb rebuilt.Who rebuilds them.thanks.Can i use a pertronix on the stock dizzy with this carb?

[franksford]

The Daytona parts company is about as good as it gets. They have done several 2x4 and a couple of blower 4000 carbs for me. Frank

[NH Ford nut]

Make sure you have your throttle shaft(s) rebushed also.
Not too many people do this.
Good luck.

[JeffB2]

Click on this:http://fordbarn.com/forum/showthread...=teapot+holley Then scroll down to post #6 this is who you want to work with.

[JeffB2]

Originally Posted by mikhett

Im looking to have my holley 4000 carb rebuilt.Who rebuilds them.thanks.Can i use a pertronix on the stock dizzy with this carb?

As far as Pertronix goes you might want to look at this:https://www.google.com/search?newwin...09.HXcBVGIAADg I would think a more reliable conversion is using Ford's DuraSpark since parts would be readily available at any local corner auto parts store which is not the case with Pertronix.Contact this member: http://fordbarn.com/forum/member.php?u=3183 to have it done and refurbish your Load-O-Matics internals and set the curve.

[scicala]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by mikhett

Im looking to have my holley 4000 carb rebuilt.Who rebuilds them.thanks.Can i use a pertronix on the stock dizzy with this carb?

I have been doing Holley 4000 teapots since 1968, along with all other domestic carburetors. I will definitely under cut Daytona's prices without sacrificing quality. I'm aware of any natural flaws on these carbs and make sure they are repaired correctly. Fully guaranteed also. 002.jpg

009.jpg

Picture 009.jpg

Picture 006.jpgI will do anything from a spot repair to normal rebuild or show resoration. Whatever you need. I will try to attach a picture or two of my work, and can supply references if needed.
Let me know if you are interested and we can discuss. Sal Cicala (586) 612-1650.
Thank you,