|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-30-2014, 02:51 PM | #1 |
Senior Member
Join Date: Nov 2013
Location: Northern Bucks Co. Pa
Posts: 632
|
What gasket Materiel ? OT Compressor
I have a old compressor to which I added a vintage Binks regulator. The two halves have a gasket (Approximately 2" dia.) between them. The gasket blew out and I replaced it with one I made from gasket paper. That worked well for about two days and the paper failed. I'm considering cutting up a plastic milk carton, etc. Any suggestions on what I should use? This gasket is on the high pressure side of the regulator.
Terry |
|
|
Sponsored Links (Register now to hide all advertisements) |
|