Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 06-07-2015, 12:26 PM   #1
Willynch
Member
 
Join Date: Oct 2014
Location: Dexter,MI
Posts: 68
Default hood alignment after radiator change

My hood is misaligned after radiator change. Bottom rear corners of hood tight. I am assuming there will need to be some fine tuning of radiator hoses, radiator support rods and radiator?

Can I do all this adjusting with the hood on?

Appreciate any thoughts/advice
Willynch is offline   Reply With Quote
Old 06-07-2015, 12:36 PM   #2
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: hood alignment after radiator change

Yes, in fact you need the hood on to see how things are lining up as you make changes. Pictures of the problem areas would help to tell what needs to be adjusted.
Tom Wesenberg is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 06-07-2015, 01:51 PM   #3
Mitch//pa
BANNED
 
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
Default Re: hood alignment after radiator change

i have seen some very poorly made radiators and the hood was never able to fit correctly..

as Tom said post pics of the whole hood view and also the problem area
Mitch//pa is offline   Reply With Quote
Old 06-07-2015, 03:18 PM   #4
huddy
Senior Member
 
huddy's Avatar
 
Join Date: Jul 2013
Location: Central NY & Central CA
Posts: 316
Default Re: hood alignment after radiator change

I know what that is like - my Coupe came to me that way & I noticed it when I saw that the shell doesn't fit right. It's on the list, below tires (mine are probably 40 yrs old) & front spring. I'll tolerate it for a while longer, but things that aren't "right" bug the heck out of me.
__________________
Owning an antique car is "start fixing one thing, find four other things that need fixing." Lather, rinse, repeat.
huddy is offline   Reply With Quote
Old 06-07-2015, 07:41 PM   #5
Synchro909
Senior Member
 
Synchro909's Avatar
 
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,497
Default Re: hood alignment after radiator change

Sponsored Links (Register now to hide all advertisements)
If the bottom back corners of the hood are too close to the cowl, it sounds as though you need to raise the radiator by putting some packing under the mounts.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood.
Synchro909 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:45 AM.