|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-25-2015, 10:42 PM | #1 |
Senior Member
Join Date: May 2010
Location: Between Seattle & Tacoma
Posts: 2,354
|
Valve spring pressure
What is the valve spring tension specification? Does anybody ever see spring tension differences, on the springs from Brattons or Snyders or a good quality supplier?thanks chuck
|
05-26-2015, 05:19 AM | #2 |
Senior Member
Join Date: May 2010
Location: Asheville,NC
Posts: 3,104
|
Re: Valve spring pressure
Chuck, I have tested the springs on several engines and new springs from several packs and find some variation in most. They run from 45# all the way to 60# pack to pack. The springs in each pack seem to be within 10% of each other but are different in each pack. I use a Rimac spring tester but have used a scale on my Bridgeport and get similar results.
__________________
http://www.model-a-ford-4bangers.com/ |
Sponsored Links (Register now to hide all advertisements) |
|
05-26-2015, 10:07 AM | #3 |
Senior Member
Join Date: Jun 2010
Location: Temecula, CA
Posts: 4,089
|
Re: Valve spring pressure
I recommend 40 lbs. on a stock cam, 60 on a mild touting cam. All should be checked.
|
05-26-2015, 02:11 PM | #4 |
Senior Member
Join Date: May 2010
Location: Between Seattle & Tacoma
Posts: 2,354
|
Re: Valve spring pressure
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|