|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
|
08-14-2019, 06:55 PM | #1 |
Senior Member
Join Date: Dec 2012
Location: Payette, ID
Posts: 936
|
Motor City Flathead Oil Pump
This project of mine has taken many many years. Business and family and of course some other forms of fun have gotten in the way. I think about 30 years ago I bought a an oil pump from Motor City Flathead. It came with a remote oil filter and various hoses and instructions. In short you drill a hole in the pan and run a hose from the pump to an oil filter and from there externally to the back of the engine and into the oil gallery.
At idle it runs about 30 pounds and and going down the road it runs 65 pounds. Never seen those pressures on flatheads before. anybody else running one of these pumps |
08-14-2019, 06:59 PM | #2 |
Senior Member
Join Date: May 2010
Location: charlottesville, Va.
Posts: 589
|
Re: Motor City Flathead Oil Pump
Yes that is about normal for a full flow system. They work great.
|
Sponsored Links (Register now to hide all advertisements) |
|
08-14-2019, 07:32 PM | #3 |
Senior Member
Join Date: Dec 2012
Location: Payette, ID
Posts: 936
|
Re: Motor City Flathead Oil Pump
Delete
|
08-14-2019, 07:36 PM | #4 |
Senior Member
Join Date: May 2010
Location: SLC Utah
Posts: 798
|
Re: Motor City Flathead Oil Pump
Been using one for 18 years; no worries!
__________________
RIP Tyler... My Son, Helper & Best Friend. Feb '78 to Father's Day '10. www.97-express.com ~ [email protected] |
08-14-2019, 08:14 PM | #5 |
Senior Member
Join Date: May 2010
Posts: 886
|
Re: Motor City Flathead Oil Pump
I have one and have not used it yet , how are the push lock lines from the pump inside the pan holding up ? I was thinking about using Aeroquip steel braid and A.N fittings instead , did you fellows change out the push lock lines for steel braided lines with screw on fittings , or am I worrying for no reason ? does there need to be a check valve and filter bypass installed also ?
Thanks, fordestes |
08-14-2019, 08:42 PM | #6 |
Senior Member
Join Date: Dec 2012
Location: Payette, ID
Posts: 936
|
Re: Motor City Flathead Oil Pump
Sponsored Links (Register now to hide all advertisements)
|
08-14-2019, 08:53 PM | #7 |
Senior Member
Join Date: May 2010
Posts: 886
|
Re: Motor City Flathead Oil Pump
Sounds like what I need to use , my kit was supplied with a push lock hoses on the inside, I think I'll go to the aircraft type hose and fittings too.
|
08-14-2019, 09:43 PM | #8 |
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,527
|
Re: Motor City Flathead Oil Pump
Mine is 20 or so years old. Has braided line in the pan and push lock outside. Never have had a problem.
|
08-14-2019, 10:48 PM | #9 |
Senior Member
Join Date: Dec 2012
Location: Payette, ID
Posts: 936
|
Re: Motor City Flathead Oil Pump
If I had a big engine compartment I would have used the push lock. In a 32 there are not many options as to filter mounting and hose routing. That is why I used braided and fire sleeve
|
08-15-2019, 07:49 AM | #10 |
Senior Member
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,067
|
Re: Motor City Flathead Oil Pump
I have a very similar setup to the MC one - though mine was made in the last few years and I like the design. My quandary was what to do about the dang filter . . . just couldn't see myself with a modern full-flow type setup anywhere in the engine compartment - yet I wanted to be able to change it and not have to crawl under the car.
So I did a bit of Imagineering and came up with this concept to modify an old Fram setup to use a modern filter (hidden in it - was an evenings work), but the results are about as good as I could come up with. Very few people would think that this was not a stock add-on oil filter setup. Yes, the filter is upside down, but the cannister has a drain in the bottom and with a few rags, I clean the cannister out. Hell, I only change the oil-filter once a year, so I live with the inconvenience as the 'look' was important to me. 2015-07-08 21.24.16 copy.jpg 2015-07-08 22.23.00 copy.jpg 2015-07-09 01.23.18 copy.jpg 2015-07-09 18.41.58 copy.jpg 2015-07-09 22.09.11 copy.jpg 2016-07-11 10.23.38 copy.jpg 2015-11-07 18.30.47 copy.jpg |
08-15-2019, 08:20 AM | #11 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,944
|
Re: Motor City Flathead Oil Pump
Your concealed filter inside the OEM canister is a great idea. Looks great too.
|
08-15-2019, 08:49 AM | #12 |
Senior Member
Join Date: Dec 2012
Location: Payette, ID
Posts: 936
|
Re: Motor City Flathead Oil Pump
I have an old toilet paper filter I could have used HAHA
|
08-15-2019, 09:08 AM | #13 |
Senior Member
Join Date: May 2010
Location: Eagle River,Alaska
Posts: 353
|
Re: Motor City Flathead Oil Pump
Dale, I bought a Hildebrant filter assembly that is a finned unit kind of like a bee hive filter. It uses a spin on filter like the one that you made. Not cheap, but has the hot rod look that I want & the filter is mounted so that it spins on from the bottom.
|
08-15-2019, 09:15 AM | #14 | |
Senior Member
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,067
|
Re: Motor City Flathead Oil Pump
Quote:
I was trying to stick to early 40's in "style" (as much as possible). I don't really like my black braded lines on my filter - need to make some hard lines for it - just haven't gotten around to it. Too busy building a new rear end, new front end and new hydraulic brakes . . . and I'm way behind as usual. LOL |
|
08-15-2019, 09:32 AM | #15 |
Senior Member
Join Date: May 2010
Location: Chester Vt
Posts: 8,860
|
Re: Motor City Flathead Oil Pump
The MC oil pump is an old design and does work very well. a friend of mine had one made for him from an article in a old car Mag,, Being Lazy I went with the 95% style (original Ford). However, I really like your filter design, Good thinking, well done. I usually place the filter behind the steering box, where it easy to change when draining the oil. Good work.
|
08-15-2019, 09:38 AM | #16 |
Senior Member
Join Date: May 2010
Location: Tucson, Az.
Posts: 322
|
Re: Motor City Flathead Oil Pump
Mark Kirby owns Motor City Flatheads. All of his products and engines are a great improvement, the best. Well engineered and built. Still in business.
|
08-15-2019, 10:21 AM | #17 | |
Senior Member
Join Date: May 2010
Location: NJ
Posts: 6,181
|
Re: Motor City Flathead Oil Pump
Quote:
Do you have any current contact info for him or his operation? Thanks, |
|
08-15-2019, 10:43 AM | #18 | |
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,858
|
Re: Motor City Flathead Oil Pump
Quote:
I put one of Mark's FF oil filter systems on my Avatar 35 fordor about 12 years/33k miles ago and it still works well, providing the same oil pressure as mentiond in first post. After Mark went out of business, there were some copies of his FF system on the market, but I don't know if they are still available.
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein |
|
08-15-2019, 11:56 AM | #19 |
Senior Member
Join Date: May 2010
Location: Granger (Northern) Indiana
Posts: 1,520
|
Re: Motor City Flathead Oil Pump
Mark's business "Motor City Flathead" ceased around 2006 if I remember correctly, but most of his parts are now available from Phil Goller at Goller's Hot Rods in Defiance OH, including the full flow pump kits.
Mark does work with Shadow Rods, mainly on the alloy flathead that is now in Mark's "new" '53 Ford test car, built by Phil. Last edited by V8 Bob; 08-15-2019 at 01:35 PM. |
08-15-2019, 10:13 AM | #20 |
Senior Member
Join Date: Nov 2015
Location: North Pole, Alaska
Posts: 2,651
|
Re: Motor City Flathead Oil Pump
I used the Hildebrant set up from OBrian Truckers as well.
Push lock fittings. Mounted on right side of firewall. Works well. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|