|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-24-2022, 03:59 PM | #1 |
Junior Member
Join Date: Jun 2022
Location: Cary, NC
Posts: 19
|
Crankshaft Pulley Bolt (P/N 5-Z1900)
Hexagonal Box Wrench for Crankshaft Pulley Bolt (P/N 5-Z1900)
Will this tool work on a Model A crankshaft?Wrench.jpg Wrench.jpg |
11-24-2022, 04:16 PM | #2 |
Senior Member
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 4,106
|
Re: Crankshaft Pulley Bolt (P/N 5-Z1900)
1 3/8" ?
__________________
www.whidbeymodelaclub.com |
Sponsored Links (Register now to hide all advertisements) |
|
11-24-2022, 08:11 PM | #3 |
Junior Member
Join Date: Jun 2022
Location: Cary, NC
Posts: 19
|
Re: Crankshaft Pulley Bolt (P/N 5-Z1900)
Yes 1 3/8
|
11-24-2022, 08:19 PM | #4 |
Senior Member
Join Date: Dec 2013
Location: Waxahachie, Texas
Posts: 949
|
Re: Crankshaft Pulley Bolt (P/N 5-Z1900)
Yes, it's made for that specific purpose. Looks like you found an original tool, congratulations.
|
11-24-2022, 10:52 PM | #5 |
Member
Join Date: May 2010
Posts: 55
|
Re: Crankshaft Pulley Bolt (P/N 5-Z1900)
Your very lucky to find an original!
I've been looking for one for years with no luck. Everyone I talk with either knows exactly what I'm describing or have one that's not for sale. |
11-25-2022, 10:18 AM | #6 |
Senior Member
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,046
|
Re: Crankshaft Pulley Bolt (P/N 5-Z1900)
Sponsored Links (Register now to hide all advertisements)
https://www.ebay.com/itm/18566513980...75.c101224.m-1
__________________
If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn! Last edited by katy; 11-25-2022 at 10:23 AM. Reason: Addition |
11-25-2022, 10:44 AM | #7 |
Senior Member
Join Date: May 2016
Location: Glide, Oregon
Posts: 1,339
|
Re: Crankshaft Pulley Bolt (P/N 5-Z1900)
Nice old original wrench but I think a 12 point would much more "usable" when turning over a engine. Space is tight.
__________________
Ruth "Sometimes you really DO need to read the whole thread" |
11-25-2022, 02:32 PM | #8 |
Senior Member
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,116
|
Re: Crankshaft Pulley Bolt (P/N 5-Z1900)
Bratton's has these:
__________________
Alaskan A's Antique Auto Mushers of Alaska Model A Ford Club of America Model A Restorers Club Antique Automobile Club of America Mullins Owner's Club |
11-25-2022, 03:02 PM | #9 |
Senior Member
Join Date: May 2016
Location: Glide, Oregon
Posts: 1,339
|
Re: Crankshaft Pulley Bolt (P/N 5-Z1900)
Here is a thread on Ratchet Nut Wrenches if anyone is interested. https://www.fordbarn.com/forum/showt...het+nut&page=2
__________________
Ruth "Sometimes you really DO need to read the whole thread" |
11-25-2022, 03:53 PM | #10 |
Junior Member
Join Date: Jun 2022
Location: Cary, NC
Posts: 19
|
Re: Crankshaft Pulley Bolt (P/N 5-Z1900)
Thank you very much!
|
11-27-2022, 11:05 AM | #11 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 3,472
|
Re: Crankshaft Pulley Bolt (P/N 5-Z1900)
I caution you to paint / tape the handle of your wrench a bright Dayglo color to remind you to remove it from the engine before starting the engine. Unfortunately, more than one Model A'er has forgotten to remove the wrench with some interesting results.
Another tip is for those who have a tool box between the frame horns. The box blocks the hand-crank hole, so the 1-3/8 offset wrench is a must have for turning the engine to time the ignition.
__________________
Bob Bidonde Last edited by Bob Bidonde; 11-28-2022 at 08:45 AM. |
11-27-2022, 05:21 PM | #12 |
Senior Member
Join Date: Dec 2013
Location: Waxahachie, Texas
Posts: 949
|
Re: Crankshaft Pulley Bolt (P/N 5-Z1900)
Be sure to read & heed what Bob B. said in post #9.
Fortunately, the only thing that happened to me was I found the fastest way to loosen the crank pulley bolt with the engine still in the car! |
11-28-2022, 05:24 PM | #13 |
Senior Member
Join Date: Aug 2015
Location: Clermont in Central Florida
Posts: 111
|
Re: Crankshaft Pulley Bolt (P/N 5-Z1900)
I bought a 1/2 inch drive 1 3/8 inch socket. Used an extension and rachet to get to it from the crank hole in the grill. Much easier than a wrench. Because it sticks out between the grill and bumper it is hard to forget to remove it. Although I probably could.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|