Need A Complete Wiring Harness for 1935 3W

[bosscat28]

I am in need of a complete wiring harness for a 35 3 Window coupe.

I have emailed Tyree Harris but haven't received a reply. I have since seen a post that he no longer does wiring on Model A's. Is he no longer making harnesses?

If so who or where is the best alternative? My car has hydraulic brakes so does the harness need modifications for that?

Thanks,

Daryl

[mrtexas]

You will need 3 harness, dash harness, headlight harness, and tail light harness. The usual suppliers have them available if you aren't interested in points judging.

[Bob C]

Originally Posted by bosscat28

I am in need of a complete wiring harness for a 35 3 Window coupe.

I have emailed Tyree Harris but haven't received a reply. I have since seen a post that he no longer does wiring on Model A's. Is he no longer making harnesses?

If so who or where is the best alternative? My car has hydraulic brakes so does the harness need modifications for that?

Thanks,

Daryl

I think he is just not doing custom harnesses for fine points cars.
Is this is the thread you were referring to https://www.fordbarn.com/forum/showth...t=tyree+harris

Originally Posted by Jim Mason
"Just got off the phone with him...he is not making custom wiring any more. apparently he made a harness identical one that got full points at a previous meet for a guy and it got dockped points at that meet. he got a lot of blow back, and now will no longer make 'custom' wiring."..


Bob

[bosscat28]

I guess I don't know what fine point cars are. Mine will not be a show car just a fun driver. Do the hydraulic brakes necessitate a custom harness?

Is [email protected] a good email?

[rockfla]

Try YNZ Yesterdays parts in Cali. they can do a custom original type harness for you with blinkers set up, master fuse link etc etc etc. (909) 798-1498

[mrtexas]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by bosscat28

I guess I don't know what fine point cars are. Mine will not be a show car just a fun driver. Do the hydraulic brakes necessitate a custom harness?

Nope, both mechanical and hydraulic brakes have a brake light switch. Tyree Harris wouldn't do a custom harness for me including turn signals.

[Charlie Stephens]

If the brake light switch is in a different location with your hydraulic brakes you need the allow for it in the harness.

Charlie Stephens

[Seth Swoboda]

Tyree is still making wiring harnesses. Give him a call. I always prefer a phone call and personal conversation over email or text. Especially with a guy as congenial as Tyree.

I will say this and in no disrespect. The model A guys and their judging standards are so high that I don't believe even they can agree among themselves what is correct and incorrect. There is a lot of arguing and fighting going on there. There are some good Model A guys on that page. There are also a lot of self proclaimed experts and know it all's.

[37don]

Rhode Island wiring west Kingston rhode island

[waterboychuck]

You might also try Sacramento vintage Ford.
http://www.vintageford.com/sect_sear...ategory=Wiring

[v8nut]

I have been very satisfied with Rhode Island Wiring.

[JM 35 Sedan]

The three sources for making wiring harnesses that come to mind for me are:
Tyree Harris, Rhode Island Wire and Narragansett.