|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
|
04-08-2020, 10:31 AM | #1 |
Senior Member
Join Date: Apr 2018
Location: Chelmsford, ON Canada
Posts: 531
|
Adjusting Clock Speed
The stock Geo. W. Borg Corp clock in my '46 Deluxe runs a bit fast, about 2-3 minutes in 24 hours. The back casing around the adjusting screw (see pic) is stamped, showing which direction to turn to go faster or slower, as well as graduation marks. How much change in speed does each mark represent? I'd like to crawl under the dash for one adjustment only.
|
04-08-2020, 11:22 AM | #2 | |
Senior Member
Join Date: May 2010
Location: Florida and Penna.
Posts: 4,471
|
Re: Adjusting Clock Speed
Quote:
changes in 24 hours. Might be easier to remove the clock. G,M,
__________________
www.fordcollector.com |
|
Sponsored Links (Register now to hide all advertisements) |
|
04-08-2020, 11:26 AM | #3 |
Senior Member
Join Date: May 2010
Location: Southern Illinois
Posts: 3,795
|
Re: Adjusting Clock Speed
G.M. is correct. It's not a quick process and the easiest solution might be to have it converted to a quartz movement.
|
04-08-2020, 11:45 AM | #4 | |
Senior Member
Join Date: May 2010
Location: pittsfield, MA
Posts: 2,086
|
Re: Adjusting Clock Speed
Quote:
John |
|
04-08-2020, 12:24 PM | #5 |
Senior Member
Join Date: May 2010
Location: Southern Illinois
Posts: 3,795
|
Re: Adjusting Clock Speed
I leave mine on 24/7 so it loses time. The quartz movement would ensure the accuracy of the clock and sacrifice no external original look. You would only lose the sound of the contact tripping to reset the movement of the original. Both work.
|
04-08-2020, 04:04 PM | #6 |
Senior Member
Join Date: Apr 2018
Location: Chelmsford, ON Canada
Posts: 531
|
Re: Adjusting Clock Speed
Sponsored Links (Register now to hide all advertisements)
|
04-08-2020, 05:44 PM | #7 | |
Senior Member
Join Date: Jul 2010
Location: Conifer, Colorado
Posts: 2,431
|
Re: Adjusting Clock Speed
Quote:
https://www.youtube.com/watch?v=s3P-...ature=youtu.be |
|
04-08-2020, 04:15 PM | #8 | |
Senior Member
Join Date: May 2010
Location: pittsfield, MA
Posts: 2,086
|
Re: Adjusting Clock Speed
Quote:
John |
|
04-08-2020, 12:21 PM | #9 | |
Senior Member
Join Date: May 2010
Location: Florida and Penna.
Posts: 4,471
|
Re: Adjusting Clock Speed
Quote:
not work. A working 54 clock is hard to find and they want more than $600.00 for them. I found several 2 1/8" O.D. clocks with a similar faces from $8.00 to $80.00 I bought the $80.00 one which was 12 volts, the car is 6 volts but I have a 6 to 12 volt inverter for the radio and hooked up to that. I also found several smaller clocks I would guess are about 1 1/2 O.D. I don't think the are over 1/2" thick. These have a smooth flat back that I can glue on an old Ford rear view mirrow. They run on small flat battery that is about 1/4" O.D. Speedway happens to stock the small clocks for $7.95 G.M.
__________________
www.fordcollector.com |
|
04-08-2020, 03:54 PM | #10 |
Senior Member
Join Date: May 2010
Location: on the Littlefield
Posts: 6,159
|
Re: Adjusting Clock Speed
some auto clocks of the era also also do a fine adjustment of the speed when the hands are set---if it has that and you adjust to correct time every few days it will correct itself
|
04-09-2020, 06:18 AM | #11 |
Senior Member
Join Date: Jan 2012
Location: Lyman,ME.
Posts: 2,631
|
Re: Adjusting Clock Speed
I have to take the radio out in my ‘50 to get to the speed adjustment. I found, as others have said you have to try one move at a time till your happy. I left the radio out while I was fine tuning it. I like the click of the winding mech......Mark
__________________
I'm thinkin' about crankin' My ragged ol' truck up and haulin' myself into town. Billy Joe Shaver |
|
|
Sponsored Links (Register now to hide all advertisements) |
|