|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-23-2022, 06:41 PM | #1 |
Member
Join Date: May 2010
Location: Rutland, MA
Posts: 81
|
Bell housing brake & Clutch pedal shaft pin removal
What is the best way to remove the pin that holds the brake and clutch pedal shaft in the bell housing. I am finding it difficult to drive the pin out from the inside of the bell housing using a punch. Cannot get a good blow to it.
thanks Keith
__________________
Keith |
10-23-2022, 08:50 PM | #2 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 3,131
|
Re: Bell housing brake & Clutch pedal shaft pin removal
The way I do it, if the bell housing has the earlier dome shape rivet, is to take a chisel and knock the head of the rivet off and then drive the the pin in from the outside.
Tom Endy |
Sponsored Links (Register now to hide all advertisements) |
|
10-24-2022, 06:28 AM | #3 |
Member
Join Date: May 2010
Location: Rutland, MA
Posts: 81
|
Re: Bell housing brake & Clutch pedal shaft pin removal
Sponsored Links (Register now to hide all advertisements)
Keith
__________________
Keith |
|
|
Sponsored Links (Register now to hide all advertisements) |
|