|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-03-2019, 02:47 AM | #1 |
Senior Member
Join Date: Aug 2010
Location: New Zealand
Posts: 1,112
|
48 to 52 f1 steering box
Hi guys. Does anyone have knowledge of a source of rebuild parts for a RHD F1 steering box 48 to 52 pickup?
|
06-03-2019, 03:22 AM | #2 |
Senior Member
Join Date: Apr 2015
Location: Sweden
Posts: 3,045
|
Re: 48 to 52 f1 steering box
If i remember right the car wormgear and rollergear fits the RHD pickup...
So should be a common part... |
Sponsored Links (Register now to hide all advertisements) |
|
06-03-2019, 01:04 PM | #3 |
Senior Member
Join Date: May 2010
Location: Central Coast, Calif.
Posts: 839
|
Re: 48 to 52 f1 steering box
Most early Ford parts suppliers have the RHD worms. All other rebuild parts are the same as LHD, granted your sector shaft is rebuildable. And the comment above is correct, in that 37-48 Ford car RHD internals can be swapped into your RHD F1 box if needed.
|
06-03-2019, 04:55 PM | #4 |
Senior Member
Join Date: Aug 2010
Location: New Zealand
Posts: 1,112
|
Re: 48 to 52 f1 steering box
Ok had a look in my stash and it does appear 37 40 type passenger and 48 52 F1 share the same replaceable components . Unless i am mistaken ,again. The top worm and sector are F1 and the lower one are passenger. Now to find a supplier of a RHD kit.
Last edited by my4dv8; 06-03-2019 at 05:03 PM. |
06-03-2019, 06:58 PM | #5 |
Senior Member
Join Date: May 2010
Location: Central Coast, Calif.
Posts: 839
|
Re: 48 to 52 f1 steering box
See links below for the RHD worm:
https://www.macsautoparts.com/ford_t...f2-and-f3.html https://cgfordparts.com/ufolder/ford...ber=78-3524-RH All other rebuild parts are the same as LHD. |
06-03-2019, 11:54 PM | #6 |
Senior Member
Join Date: Apr 2015
Location: Sweden
Posts: 3,045
|
Re: 48 to 52 f1 steering box
Sponsored Links (Register now to hide all advertisements)
Same as that the early RHD parts is just another years LHD parts. Depending on if the sectorshaft goes CW or CCW. And thatīs the reason Macs and other vendors stock the RHD parts...itīs just another model LHD part...check the ford part numbers should give you a clue... |
06-04-2019, 10:46 AM | #7 | |
Senior Member
Join Date: May 2010
Location: Central Coast, Calif.
Posts: 839
|
Re: 48 to 52 f1 steering box
Quote:
LHD sectors have the roller canted to the right, RHD sectors have the roller canted to the left. |
|
06-04-2019, 02:16 PM | #8 |
Senior Member
Join Date: Aug 2010
Location: New Zealand
Posts: 1,112
|
Re: 48 to 52 f1 steering box
they are different as Neal says.
1937-1948 Steering Box Rebuild Kit (Right Hand Drive) [78-3503-RHDKIT 1937-1948 Steering Box Rebuild Kit [78-3503-RBLDKIT] |
|
|
Sponsored Links (Register now to hide all advertisements) |
|